Windows 10: Windows 10 Pro boot issue

When I restart my PC the system says it is doing an auto repair. Eventually I see screen asking me to 'choose an option'. If I select continue I get a failed boot.If I select 'use another operating syatem' then I am told to 'choose an operating system' between Windows10 and Windows10Pro as per middle photo below.. I have only installed Windows10Pro which I did after upgrading from HDD to SataSSD. If I select Windows10Pro then system boots normally.I suspect the error is due to the 100MB System Reserved Drive D: which is a partition on my Drive F: Drive F: is where I store all the Windows libr

:)

 

windows 10 slow boot

I was having a slow boot issue on my Windows 7 install a little while back. It would take about 30 - 40 extra seconds to boot up for whatever reason.

I would try following these steps, while this didn't solve my issue, it did increase Read/Write to where it should be.

10 Tips for SSD Optimization in Windows 7 - Part 1

Looks to be similar to this: https://www.back2gaming.com/focus-story/ssd-optimization-for-windows-10-windows-8-and-8-1/


In the end, I had to reinstall my Windows 7 entirely to fix the booting issue. It was taking around 35 seconds to boot, and after the fresh install it takes about 7 seconds to boot.

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks