Windows 10: Windows 10 Pro N update error 0xC1900101

On windows update current version 10.0.18363.1556 0x80073cfd, bluescreen error occurs at around 30% completion after first restart showing error:"Stop code: PAGE FAULT IN NONPAGED AREA"Then when it undoes the update and restarts to desktop then following shows:"0xC1900101 - 0x30018 - the installation failed in the FIRST_BOOT phase with an error during SYSPREP_SPECIALIZE"I'm running on the following:OS: Windows 10 Pro N 64-bit 10.0, Build 18363System Model: MS-7917BIOS: BIOS Date: 05/28/15 10:16:38 Ver: V1.11B0Processor: IntelR CoreTM i7-4790K CPU @4.00GHz 8 CPUs, ~4.0GHzGraphics: N

:)

 

Windows 10 Update Error 0xC1900101 - 0x40017

Hi,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

I understand your concern with the error: 0xC1900101 - 0x40017 while upgrading to Windows 10, we will help you with this issue.

I would like to inform that this error may occur for one of the following reasons:

• Antivirus software conflicts
• Hardware conflicts
• Corrupted/ faulty driver conflicts

I suggest you to refer to the below article by Andre Da Costa, try the troubleshooting steps mentioned under:
0xC1900101 - 0x40017 error code and check if it helps.

How to: Troubleshoot common Setup and Stop Errors during Windows 10 Installation

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

 

Unable to upgrade one of the system to Windows 10 Update Error 0xC1900101 - 0x20004

Thank you for the reply. I read both of those threads already.

1. Resetting BIOS. I flashed BIOS to the latest version. Currently running default settings. No change.

2. Andre da Costa brings up a list of reasons. For error 0xC1900101-0x20017 he says refer to error 0xc000021a.

2a. Regarding his troubleshooting steps for error 0xc000021a. He says to wipe the drive and switch from NTFS to GPT. This is incorrect. If this was true, then no one could update from Windows 7 to Windows 10 without a clean install. Beyond which, I updated
my first desktop from Windows 7 to Windows 10 when it was running Windows 7 on NTFS.

2b. Regarding his additional troubleshooting steps for error 0xC1900101-0x20017. He has a number of suggestions, such as disabling peripherals. I tried all of these for both .iso and USB installs. No luck.

Any other suggestions?

 

Unable to update Windows 10 Pro version 1709 to 1803

Have made several attempts to update Windows 10 version 1709 to the latest version 1803 and have not been successful.

I've done the following per some suggestions found online:

• Updated drivers
• Ran the Trouble Shooter for Windows 10 (Errors found were shown to be "Fixed" per the tool)
• Unplugged the printer

Although not at every attempt, I have received the following errors:

• 0xc1900101
• 0x80070643

Can someone please advise me as to what the errors are and provide me with the steps to update Windows.

Thank you.