Windows 10: Windows 10 stuck on blue logo no dots

Recently, I booted up my unused windows 10 SSD. It was all going smooth at first. I was downloading programs, so I left the computer running for the night (about 6-8h) and turned the monitor off. Next morning I turned it back on. There wasn't anything on the screen.

After a few minutes I noticed the SSD has disconnected itself from the motherboard (propably due to not screwing it up).


Windows 10 is now stuck at the blue windows logo (without the spinning dots). It turns off immiediately when I press the power button, so I can't acess the safe mode or anything like that. It is definetly the SSD or the system on it causing the problem (other drives work).


Thank you. Marceli

:)

 

Installation Hangs at Blue Windows Logo, Error Code C1900101-20017

The BIOS update suggestion posted above by @Jegler helped me, @guhanath. I was on version 1.10 and updated to 1.90. The steps I took after that were just doing the official Windows 10 upgrade procedure.

Then the Windows 10 installation went without a hitch, and I'm no longer on Windows 7. I'm going to consider this solved, thank you @Jelger for the suggestion to update the BIOS!

 

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

Windows 10 stuck at Black Screen with Blue Windows Logo no spinning dots

 

Windows 10 installation stuck at blue logo(no spinning dots)


All,

I downloaded windows 10 ISO(I purchased it) file and created bootable DVD and USB using Rufus. I want to install windows 10 in one of the system which had corrupted windows 7 in SSD(No data or nothing is required)

My system config is below
Intel i5(4th gen)
Gigabyte H87 D3H(which has UEFI) and flashed to version 9
Nvidia 9400 GT(driver not updated but the site listing says it is compatible with win 10)
8GB RAM
SSD(60 GB, which has corrupted win 7)
HDD(500 GB)

Believe I have the minimum system requirement to install Windows 10?
After selecting cd/dvd/usb, windows 10 logo appears(without any spinning dots, just plain logo) and get stuck there. I waited for 1-2 hour but nothing happened. I searched and some of them have suggested to remove components and keep only bare minimum. So I tried removing GFX card and the HDD, and kept only SSD(default changed to IGFX). But even then it doesnt move forward from the windows logo screen.
Please someone suggest, how to move this installation further? Any debugging options? Anything I am missing here? I purchased it and hence I dont want to waste the money I spent on it.
I checked in BIOS and I can confirm that Fast boot is disabled or Data Execution Prevention and/or similar options are enabled.
Note:I havent used media creation tool here


To confim whether my bootable DVD/USB had some errors in initiating setup, I tried running setup.exe within my friends machine(win 7) and it is launching and giving me screens to download updates and/or to enter product key. Images attached which gives indication that setup is launching.
But when I try to run the setup as bootable DVD/USB I get the blue logo screen and nothing happens.(even no spinning dots below logo and/or errors to share) Refer Image - Win10_Bootable_DVD.jpg

Any help is appreciated to move this forward.

Thanks
Guhan