Windows 10: Windows 10 update fails with the error

Discus and support Windows 10 update fails with the error in Windows 10 Installation and Upgrade to solve the problem; Error on The Windows update screen: We couldn’t install Windows 10. We’ve set your PC back to the way it was right before you started installing... Discussion in 'Windows 10 Installation and Upgrade' started by NitinMehta1, Dec 25, 2019.

  1. Windows 10 update fails with the error


    Error on The Windows update screen:

    We couldn’t install Windows 10.

    We’ve set your PC back to the way it was right before you started installing Windows 10.

    0xC1900101 - 0x30018
    The installation failed in the FIRST_BOOT phase with an error during SYSPREP operation.


    Found the following error messages in C:\$WINDOWS.~BT\Sources\Rollback\setupapi\setupapi.dev.log


    !!! cpy: Drp specified for non NT5 Crypto file 'C:\WINDOWS\system32\DRIVERS\mouclass.sys'.
    !!! cpy: Error 186: The flag passed is not correct.
    !!! cpy: Drp specified for non NT5 Crypto file 'C:\WINDOWS\system32\DRIVERS\i8042prt.sys'.
    !!! cpy: Error 186: The flag passed is not correct.
    !!! cpy: Drp specified for non NT5 Crypto file 'C:\WINDOWS\system32\DRIVERS\pci.sys'.
    !!! cpy: Error 186: The flag passed is not correct.

    :)
     
    NitinMehta1, Dec 25, 2019
    #1

  2. Windows 10 fails to update


    When you finish testing the Avast suggestion, make sure that you restart your machine.

    Then if the issue persists, please return to the trouble shooting list in post# 89

    I think there are three steps that remain; the WU troubleshooter, reset WU components, and manual WU reset.
     
    Slartybart, Dec 25, 2019
    #2
  3. jds21 Win User
    Windows Updates failed to instal

    I just did step one and they have just all installed.... thank you so much.... it was quite frustrating having that update window pop up every 5 minutes and failing to instal every time

    Thanks mate
     
    jds21, Dec 25, 2019
    #3
  4. AsRock Win User

    Windows 10 update fails with the error

    Windows Updates failed to instal

    I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

    Step 1 Register DLL files.

    =================

    By trying this step, we can check if the update engines are working properly.



    1. Close all instances of Internet Explorer.

    2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



    Note: There is a space between regsvr32 and atl.dll



    3. Similarly, one by one, register the files listed below:



    Regsvr32 msxml3.dll

    Regsvr32 wuapi.dll

    Regsvr32 wuaueng.dll

    Regsvr32 wuaueng1.dll

    Regsvr32 wups2.dll

    Regsvr32 wucltui.dll

    Regsvr32 wups.dll

    Regsvr32 wuweb.dll

    Regsvr32 qmgr.dll

    Regsvr32 qmgrprxy.dll

    Regsvr32 jscript.dll



    Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



    If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



    Step 2 Verify the relevant Windows Update services.

    =========================================

    1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

    2. Double click the service "Automatic Updates".

    3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

    4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

    5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

    6. Then please click the button "Start" under "Service Status" to start the service.

    7. Please repeat the above steps with the other services:



    Background Intelligent Transfer Service

    Event Log

    Remote Procedure Call (RPC)



    Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



    If it still does not help, let's proceed to step 3.



    Step 3 Reload the Update temporary folders.

    ===================================

    One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



    1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net stop WuAuServ



    2. Click Start, Run, type: %windir% and press Enter.

    3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

    4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net start WuAuServ



    Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.
     
    AsRock, Dec 25, 2019
    #4
Thema:

Windows 10 update fails with the error

Loading...
  1. Windows 10 update fails with the error - Similar Threads - update fails error

  2. Update failed error....Windows 10

    in Windows 10 Installation and Upgrade
    Update failed error....Windows 10: I JUST WENT THROUGH THE ENTIRE PARTITION CHANGE INSTRUCTIONS, REBOOTED MY LAPTOP, WENT TO UPDATES AND THE UPDATE STILL FAILED. WHY IS IT SO DIFFICULT FOR YOU TO FIND A FIX FOR A PROBLEM YOU CREATED?...
  3. Update failed error....Windows 10

    in Windows 10 Gaming
    Update failed error....Windows 10: I JUST WENT THROUGH THE ENTIRE PARTITION CHANGE INSTRUCTIONS, REBOOTED MY LAPTOP, WENT TO UPDATES AND THE UPDATE STILL FAILED. WHY IS IT SO DIFFICULT FOR YOU TO FIND A FIX FOR A PROBLEM YOU CREATED?...
  4. Update failed error....Windows 10

    in Windows 10 Software and Apps
    Update failed error....Windows 10: I JUST WENT THROUGH THE ENTIRE PARTITION CHANGE INSTRUCTIONS, REBOOTED MY LAPTOP, WENT TO UPDATES AND THE UPDATE STILL FAILED. WHY IS IT SO DIFFICULT FOR YOU TO FIND A FIX FOR A PROBLEM YOU CREATED?...
  5. Windows 10 Update Fails with error: 0x800707e7

    in Windows 10 Software and Apps
    Windows 10 Update Fails with error: 0x800707e7: I've been having this issue for a few months now, but I'm finally determined to fix it. The thing is I'm stuck at windows 10 version 19043.1826, and everytime I try to update windows, it will restart and get to about 70ish percent when an error occurs and it undoes all...
  6. Windows 10 Update Fails with error: 0x800707e7

    in Windows 10 Installation and Upgrade
    Windows 10 Update Fails with error: 0x800707e7: I've been having this issue for a few months now, but I'm finally determined to fix it. The thing is I'm stuck at windows 10 version 19043.1826, and everytime I try to update windows, it will restart and get to about 70ish percent when an error occurs and it undoes all...
  7. Windows 10 update fails with error: 0x800707E7

    in Windows 10 Installation and Upgrade
    Windows 10 update fails with error: 0x800707E7: From past couple of months, windows is trying to install an update called Windows 10, version 20H2 and it keeps on failing with error code 0x800707e7.I have tried windows troubleshooter. Clearing disk space. Ran sfc /scannow. Nothing worked.My windows version is Windows 10...
  8. Windows 10 Update failed: error 0x80004005

    in Windows 10 Installation and Upgrade
    Windows 10 Update failed: error 0x80004005: I have Windows 10 OS build 19041.630 and I'm trying to install the 20H2 version. Every time it tries to do it automatically it fails with error code 0x80004005. I've investigated and tried many different options including but not limited to the steps in here...
  9. Windows 10 Update Fails with error: 0x800707e7

    in Windows 10 Installation and Upgrade
    Windows 10 Update Fails with error: 0x800707e7: I've been having this issue for months now. Each time I try to update to version 2004, I get this error 0x800707e7. I have read many answers about this and issue and tried different things, but nothing has worked till now. Every time I try to update, it restarts and goes to...
  10. windows 10 update fail and error

    in Windows 10 Installation and Upgrade
    windows 10 update fail and error: I am trying to update the windows 10 but it shows errors in how I fix it I am uploading some screenshots. [ATTACH][ATTACH] https://answers.microsoft.com/en-us/windows/forum/all/windows-10-update-fail-and-error/119ad360-9d73-4b5b-b927-72b5552f8355

Users found this page by searching for:

  1. errore 0x8020002b