Windows 10: Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006"

Discus and support Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006" in Windows 10 Installation and Upgrade to solve the problem; Hi all, I have tried everything I can find to fix this problem and I don't know what else to do. For about a year now I have been completely unable... Discussion in 'Windows 10 Installation and Upgrade' started by solspectr, Jun 16, 2019.

  1. solspectr Win User

    Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006"


    Hi all,


    I have tried everything I can find to fix this problem and I don't know what else to do. For about a year now I have been completely unable to install a Windows Update from Version 1709. Unfortunately I no longer have the Windows 10 USB I used to install Windows on my PC (which I built), and I'm not sure if either putting an .ISO of it on a USB, or just taking the hit and buying another one will solve my problem.


    When I run the Windows 10 Setup, it gives me error code "0x8007001F - 0x20006" and says "The installation failed in the SAFE_OS phase with an error during REPLICATE_OC operation."


    Further, if I look in the Windows Update Settings, under Update status it tells me "A current driver on your PC may be better than the driver we're trying to install. We'll keep trying to install." I've seen that message for months now and have no solution.


    I have tried every solution offered in this thread with the same problem: https://answers.microsoft.com/en-us...6/5797cde4-6996-4359-bea4-644e9c22f48d?page=1 and none of them have given me positive results. Every time Windows attempts to update/reinstall, it stops and my PC boots back up with an "Undoing Changes" message. At this point I'd also be willing to just do a clean install, but is there any way for me to even do this without my original Windows 10 USB?


    Any help would be very much appreciated, thank you!

    :)
     
    solspectr, Jun 16, 2019
    #1

  2. Windows 10 Update keeps failing 0x8007001F - 0x20006


    I would not be posting here, if it weren't because I've tried everything I can think of. I know that there is similar threads, but I have tried the suggested solutions in nearly all of them, so I am making a new one, in the hopes that someone can give med a clue on whats causing this.


    What I am trying to do
    I am trying to update windows 10 to 1709 (the Fall Creators Update) and now, 1803 (Windows 10 April 2018 Update)


    System information
    I am currently on Windows 10 Pro 64bit Version 1607 (operating system build 14393.1593) desktop pc

    CPU: Intel Core i7-4790K Devils Canyon (4th Generation Intel® Core™ i7 Processors)
    Motherboard: ASUS Z97-PRO GAMER
    GPU: NVIDIA EVGA 1080 SC
    SSD for C: drive, HDD for ekstra drive.


    The installation error
    I'm getting the following error message: "the installation has failed during SAFE_OS with error in operation REPLICATE_OC"
    With the error code: "0x8007001F - 0x20006". Screenshot:

    Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006" [​IMG]


    Furthermore I found a useful tool from Microsoft called SetupDiag which concludes this is the issue:

    Code:
    Code:
    Error: SetupDiag reports Optional Component installation failed to open OC Package. Package Name: Foundation, Error: 0x8007001F  Recommend you check the "Windows Modules Installer" service (Trusted Installer) is started on the system and set to automatic start, reboot and try the update again.  Optionally, you can check the status of optional components on the system (search for Windows Features), uninstall any unneeded optional components, reboot and try the update again.  Full log: SetupDiagResults.log - Pastebin.com
    Interestingly I sometimes get this SetupDiagResults.log instead with the extend code 0x50015: SetupDiagResults.log - Pastebin.com

    For the record I have tried to "set Windows Modules Installer" service (Trusted Installer) to automatic start, reboot and tried the update again" multiple times.



    The logs
    C:\Windows\Logs\CBS\CBS.log for today: CBS.log - Pastebin.com

    C:\$WINDOWS.~BT\Sources\Rollback\setuperr.log C:$WINDOWS.~BTSourcesRollbacksetuperr.log - Pastebin.com

    C:\$WINDOWS.~BT\Sources\Rollback\setupact.log C:$WINDOWS.~BTSourcesRollbacksetupact.log - Pastebin.com

    The logs SetupDiag collected as a zip file: https://file.io/LeHFnE

    Recent windows updates: Windows update recent log - Pastebin.com



    What I have tried so far
    I have tried the following ways to update for the past 5-8 months:
    • Downloaded media creation tool and tried to upgrade with it
    • Created a .iso file, mounted it and tried to update with it
    • Created a USB installer with the media creation tool and tried to update with it
    • Tried updating with windows update (built in)
    • Tried updating with windows update assistent which got installed automatically (by windows update?)
    • Tried updating by downloading and installing windows update assistent manually
    • Tried many different combinations of choosing to install updates and not
    Windows fails every time with the before mentioned error.


    I have also tried "repairing my system" in multiple ways:
    • Reinstall built in windows 10 apps using powershell:
      Code:
      Code:
      PS C:\WINDOWS\system32> Get-AppxPackage -AllUsers| Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
    Full log: Powershell reinstall built in apps - Pastebin.com

    Furthermore i did steps to minimize risk of failure:
    • Removed all unnecessary hardware (except mouse and keyboard)
    • Uninstalled my Anti Virus
    • Updated my network drivers, graphic drivers, audio drivers
    • Disconnected from the internet while updating

    So to my questions now:
    Question 1)
    What exactly is SetupDiag suggesting here?

    Code:
    Code:
    Optionally, you can check the status of optional components on the system (search for Windows Features), uninstall any unneeded optional components, reboot and try the update again.
    Question 2)
    If you are a talented technican, can you tell me anything helpful on what is causing the update to fail from looking at the logs?


    Please don't suggest a clean install, as I already know this is a option, but in my case, almost impossible to do.
     
    Ten4TheWin, Jun 16, 2019
    #2
  3. Error code 0X8007001f

    I followed the steps but I got the same error message as I got when I tried the suggestion of DaveM121 -- 0x8007001F-0x20006

    The installation failed in the SAFE_OS phase with an error during the REPLICATE_OC operation.
     
    kevingillie1, Jun 16, 2019
    #3
  4. Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006"

    Windows 10 Update keeps failing 0x8007001F - 0x20006


    Hi Ten4TheWin. Welcome to the TenForums @Ten4TheWin

    Could you please confirm what version of windows you are using. The Windows update log says 1607 and then one with 1803.

    Windows Key + R, type winver, enter

    This link is dead.


    Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006" [​IMG]


    Do you have a iso for your current version? (1609, 1703, 1709)

    It maybe necessary to run sfc /scannow three times to repair errors.

    I assume the Features they are mentioning are

    Click Start > type Control Panel, enter, Programs, Under the Heading Programs and Features....



    Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006" [​IMG]



    Ken
     
    Caledon Ken, Jun 16, 2019
    #4
Thema:

Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006"

Loading...
  1. Windows 10 Updates failing, stuck on Version 1709. Error code "0x8007001F - 0x20006" - Similar Threads - Updates failing stuck

  2. Can't Upgrade, Error 0x8007001F - 0x2006 and more, Stuck on 1709

    in Windows 10 Installation and Upgrade
    Can't Upgrade, Error 0x8007001F - 0x2006 and more, Stuck on 1709: Hello, for the past year my brother's computer has been stuck on Windows 10 Ver. 1709 (Build 16299.371) and I haven't paid much attention to the issue until recently this month. I've been trying to upgrade to 1803/1809 but been unable to due to Windows Update failing with...
  3. Windows 10 Update keeps failing with error 0x8007001f – 0x20006

    in Windows 10 News
    Windows 10 Update keeps failing with error 0x8007001f – 0x20006: [ATTACH] [ATTACH]The Windows Media Creation tool by Microsoft is a useful tool to get your computer to download and install the latest version of the Windows 10 operating system. However, during setup, it has been known to give the following error [...] This post Windows 10...
  4. Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006

    in Windows 10 Installation and Upgrade
    Unable to upgrade to Windows 10 from Windows 7. Error: 0x8007001F - 0x20006: I'm trying to update my windows 7 machine to windows 10, using the installation guide here : https://www.microsoft.com/en-us/software-download/windows10 I'm updating to 7 to 10 while keeping my programs/files. As I update it downloads okay, and installs. Then when it...
  5. error code 0x8007001f

    in Windows 10 Installation and Upgrade
    error code 0x8007001f: I get this error code every time my pc tries to update to win 1803 pc has tried over 50 times have tried troubleshooting as an admin but still no joy can any one help my pc is a Lenovo c540 touch...
  6. 0x8007001F - 0x20006 Error When Attempting to Install Culmulative Build

    in Windows 10 Installation and Upgrade
    0x8007001F - 0x20006 Error When Attempting to Install Culmulative Build: There was an unstable WiFi connection, and this build did not install the Culmulative Build properly. Further attempts to update also failed There are no third-party anti-virus software installed. The Error Message included: The installation failed in the SAFE_OS phase...
  7. Error 0x8007001F - 0x20006 when updating

    in Windows 10 Installation and Upgrade
    Error 0x8007001F - 0x20006 when updating: I am trying to update to the latest version of Windows. The downloading is successful, so I restart my computer. After the first reboot, it starts restoring back to my previous version of Windows. Then, I tried using the Windows ISO. Again, the downloading was successful, so...
  8. Windows 10 Update keeps failing 0x8007001F - 0x20006

    in Windows 10 Installation and Upgrade
    Windows 10 Update keeps failing 0x8007001F - 0x20006: I would not be posting here, if it weren't because I've tried everything I can think of. I know that there is similar threads, but I have tried the suggested solutions in nearly all of them, so I am making a new one, in the hopes that someone can give med a clue on whats...
  9. 0x8007001F - 0x20006 Error When Attempting to Install 9/12 Culmulative Build

    in Windows 10 Installation and Upgrade
    0x8007001F - 0x20006 Error When Attempting to Install 9/12 Culmulative Build: There was an unstable WiFi connection, and this build did not install the 9/12 Culmulative Build properly. Further attempts to update also failed I resorted to creating a WINDOW ISO disk, and was able to begin a reinstall. However, the install would proceed until just...
  10. Windows 10 anniversary update - error code 0x8007001f

    in Windows 10 Updates and Activation
    Windows 10 anniversary update - error code 0x8007001f: Hi all, I cannot update to Windows 10 anniversary update. I get the 0x8007001f error code. Here is the log from C:\$WINDOWS.~BT\Sources\Panther\setuperr.log Code: 2016-09-08 17:28:05, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class...