Windows 10: Windows 10 won’t boot at all

This has been quite a process for me so I’ll try to recount everything.

1. 
   When I got this PC prebuilt, Windows 10 was installed on the SSD. I moved over the hard drive I used on my previous PC which also had Windows 10 installed on it and proceeded to boot Windows from there.
   
   
2. 
   About 2 weeks ago I installed Windows update 20H2 (I believe) and my PC was now booting from the SSD. This wasn’t a major problem but I had lost all my settings and every file location was messed up as the disk letters had switched.
   
   
3. 
   I did some tampering in the BIOS but wasn’t able to figure out how to get Windows to boot from my hard drive so my solution was to just disconnect the SSD and use my PC without it which worked fine.
   
   
4. 
   A few days ago I wanted to play a game which I had installed on the SSD so I plugged it back in and changed some boot priority settings in the BIOS and eventually got everything to boot like it would’ve before I started having problems.
   
   
5. 
   I got home last night after not using my PC since I got everything working and turned it on to find the “Reboot and select proper Boot device” message.
   

Now where I stand is that booting from the SSD will cause my PC to blue screen and booting from the hard drive will just yield the same message. Any help on getting things back to the way they were would be helpful. Someone mentioned using diskpart in a previous thread which I had neglected to do but if it is the solution here I will utilize it this time.

submitted by /u/xDogebot
[link] [comments]

:)

 

Skype won´t wok in 17063

Skype Won´t work... games won´t work...

Making backup and re-format...

Maybe I Install a Windows 7 again, At least, all of my games run smoothly ...Sadness!!

*Banghead

 

Sabertooth 990fx won't boot to windows logo, it shuts down

to boot and enter bios and load windows, any todays PSU (with the correct plugs) will work, AFAIK

to enter BIOS only low wattage is used.
Then, during boot, the HDD and a bit later the videocard card start to demand juice, then the other devices and periphericals... so the total demand during boot up is incrementing step by step, that's why a failure halfway could indicate a PSU problem....

 

My pc won´t boot Windows 10 from USB/DVD

So I wanted to change from my Windows 10 x32 bits to 64x. I downloaded the Mediacreationtool and used it in both a USB and a DVD. Tried used the usb, the disk and both at the same time but they won´t boot.

I have a P7H55-M motherboard, the BIOS is updated and configured to boot first DVD, second usb and third SATA.

So if someone could help me it´d be great.