Windows 10: Windows 10 won't boot past "Preparing Automatic Repair"

So I tried installing a BIOS update on my Lenovo Ideapad 320-15IKB, but when it tried restarting it went right to a bluescreen with the stopcode "INACCESSIBLE_BOOT_DEVICE". After this it tries to boot up automatic repair, but it stops there. The loading wheel doesn't even appear. This happens every time I reset the system.


I am able to access BIOS, but I can't seem to figure out if any of the settings do anything to resolve the issue.

USB drives won't register at all, and I do not have a disc from which to boot.

I am not able to open the chassis in order to do a hard reset.


Is there anything I can do to resolve the issue?

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.







When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.

My disk is on MBR partirion. Is this related to my UEFI/Partitions?



Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."



Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere?



I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Stop making new threads about the same subject. If you have updated information, post it in the thread you made in the first place.

http://www.techpowerup.com/forums/t...-loop-and-applications-not-responding.219960/

Next time you make a thread about Windows 10 booting twice because of UEFI/MBR issues, I'm banning you for spam.