Windows 10: Windows 11 fresh setup all of a sudden crashing with a wide variety of BSOD

I really wonder what has become of Microsoft and their products. Not only is Windows 11 an utter failure when it comes to stability but the fact that updates break an earlier installation entirely so that even the network is no longer usable despite working drivers only getting APIPA addresses and the sound also failing to work entirely despite being one of the widest available sound chips brings me to the point to entirely put my back on Microsoft and investing more in Apple products and setting up my hardware with alternative operating systems that cause way less problems once set up properl

:)

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

Fresh Windows 10 crashing with BSOD

I have a problematic system that I can't seem to diagnose. I keep getting the following BSODs:

• KMODE_EXCEPTION_NOT_HANDLED - 0x0000001e
• SYSTEM_SERVICE_EXCEPTION - 0x0000003b

Hardware:

• Intel i9-9900k @ 3.6GHz (stock)
• ASUSTek ROG Strix Z390-E Gaming (BIOS version 1602 - latest version at time of this post)
• 48GB RAM (2x8GB + 2X16GB ) G.SKILL DDR4 3200 @ 1069MHz
• NVidia Quadro K2200
• Samsung SSD 860 EVO 500GB (OS drive)
• WD 1002FAEX-00Z3A0 1TB (Data drive)
• Corsair RM750x CP-9020179-NA 750W PSU
• No optical drives

Hardware test status:

• Completed 8 successful passes in MemTest86+ (an overnight run)
• Ran Prime95 for 12+ hours with no problems
• All power cables checked, re-seated.
• GPU passed FurMark run overnight
• System is clean. Not an overheating issue, even when running P95.
• Hard drives SMART attributes all look good.
• Checked over the motherboard and GPU for signs of damaged/bulging/leaking caps. All fine.

Software status:

• All Windows updates applied.
• System scanned and verified clean with MBAM and Avast.
• Motherboard BIOS updated to latest version
  1602. Reset multiple times.
• Used DDU to remove GPU drivers. Reinstalled with latest version.
• Installed latest drivers from Asus website for:
  • Audio
    
  • LAN
  • Wireless
  • Firmware
  • Chipset
  • Bluetooth

Windows:

The system was reinstalled on the 9th June 2020 with a fresh copy of Windows 10 Pro v2004 via USB and the installation went smoothly. System was working fine until the 3rd August when the crashes started.

Windows Reliability Monitor [WRM] showed a problem with the ASUS ArmouryCrate (ArmouryIgoService.exe) service crashing. This service was installed during the initial setup, after being prompted by the first-time setup wizard. I removed the service - along
with several other bits of Asus bloat that came with it - and disabled the option to install it in the BIOS. This was a new one to me, I've never been prompted to install 3rd party software during the Windows first time setup before, but it appears to be a
feature on these boards.

Further BSODs occurred after this with a variety of programs, such as Blender, Discord, Adobe Premiere, and a couple of games. I have attached links to screenshots of the WRM at the bottom of this post if that is of use. The crashes seem to occur most often
when clicking links, or trying to download files.

Inspection of a few of the dump files using Nirsoft's Blue Screen View shows a variety of error messages, including:

• KMODE_EXCEPTION_NOT_HANDLED - 0x0000001e
  • fwpkclnt.sys (only shows in some dumps)
  • ntoskrnl.exe
• SYSTEM_SERVICE_EXCEPTION - 0x0000003b
  • ntoskrnl.exe

Several of the dump files are available to download in a RAR archive here: dumps.rar

Screenshots of the Windows Reliability Monitor:

• https://i.imgur.com/UgJ5kGJ.png
  
• https://i.imgur.com/q7pWcai.png
  
• https://i.imgur.com/CrnGy28.png
  
• https://i.imgur.com/EHNtfnG.png
  
• https://i.imgur.com/fI4tdfZ.png
  
• https://i.imgur.com/5HGDOEZ.png
  
• https://i.imgur.com/MdMgo6J.png
  
• https://i.imgur.com/QjB5FMC.png
  
• https://i.imgur.com/QBwqFi0.png
  
• https://i.imgur.com/xcLfTVP.png
  
• https://i.imgur.com/YwF8zbF.png
  
• https://i.imgur.com/MKYXzua.png
• https://i.imgur.com/P7jPTFN.png
  
• https://i.imgur.com/9JGdqNu.png
  
• https://i.imgur.com/jronb7A.png
  
• https://i.imgur.com/S0cFXBI.png
  
• https://i.imgur.com/sT4ery6.png
  
• https://i.imgur.com/JYAnofJ.png
  
• https://i.imgur.com/WpiiaUb.png
  
• https://i.imgur.com/TDyqmor.png
  
• https://i.imgur.com/FfJKJLX.png
  
• https://i.imgur.com/unsDtZh.png

Any and all help is appreciated. At this point I'm wondering if it's a bad NIC, or bad core. Any suggestions?

 

Multiple BSODs in a fresh install of Windows 10


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window