Windows 10: Windows 11 Round Robin Nic Teaming

On windows 10 devices I could have 2 individual gigabit nics and during large file transfers both nics would be used. Meaning that between 2 devices, with 2 gigabit nics I would achieve a transfer speed of 190ish MB/s transfer rates. On windows 11 this is no longer the case. Is there a way to turn this back on? I do not want to buy a 2.5gb switch as they are still very $$$ and run very hot with all kinds of issues. I ended up downgrading back to windows 10 and things went back to normal.

:)

 

memtest86+ : Difference between Round Robin and Sequential? Better?

Good morning, folks:

I found this in the PassMark memtest86 manual (not memtest86+). As memtest86+ was a fork from an earlier version of memtest86, it may be the same:

• Parallel - executes the memory tests on all CPUs concurrently, on a set of non-overlapping memory segments
• Round Robin - only one CPU is running a test at any given time but cycles to the next CPU in a round robin fashion after every test
• Sequential - only one CPU is running a test at any given time but cycles to the next CPU after a certain memory size has been tested by the CPU.

I'm wondering what the functional difference is between Round Robin and Sequential. They seem virtually the same.

I'm testing an old laptop that cannot sustain Parallel testing (too much heat). I want thorough testing, but prefer faster rather than slower. So, which is the next best choice: Round Robin or Sequential?

 

memtest86+ : Difference between Round Robin and Sequential? Better?

Hi.

Round Robin. Seems a bit more balanced to me.
If you like, run both.

*Biggrin

 

memtest86+ : Difference between Round Robin and Sequential? Better?

Single - specifies a single CPU core to test, and prompts the user to enter a valid CPU ID number

Parallel - executes the memory tests on all physical (ie. non-hyperthread) CPU cores concurrently, on a set of
non-overlapping memory segments. Memory segments are allocated consecutively to CPU core numbers in
alternating ascending and descending order for each pass.

Round Robin - only one CPU core is running a test at any given time but cycles to the next CPU core in a round robin fashion after every test

Sequential - only one CPU core is running a test at any given time but cycles to the next CPU after a certain
memory size has been tested by the CPU core.