Windows 10: Windows does not print anything, on any printer

Model: Surface 3

OS: Windows 10

Version: 1903

Build: 18362.75


I updated my os to this version last week. Since then I cannot print anything. I tried all the troubleshooting methods I found online, but it didn´t help.


I can install printers, see the status of each of them, and do any configuration action with the printers as I normally could. But when I print, regardless of the program I use, it "sends" the job to the printer. When I select the printer icon in the notification tray, it does not open. If I go to the Control Panel, and enter "see what´s printing", it´s empty.


I tried printing to pdf and xps, and it generates the correspoding document. If I open it though, the reader exits with an error similar to this: "Document is blank". I tested Chrome, Edge, Adobe reader and XPS reader for opening documents.


For printing, I used Office, and the readers mentioned above.


Any advice will be greatly appreciated.

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

Print to PDF missing in Printer List

Hi William,

We suggest that you disable and re-enable the Print to PDF feature. Here are the steps:

• Click on the Start menu and type in Windows Features.
• Choose Turn Windows features on or off.
• On the next window, find Microsoft Print to PDF and disable it. Click
  OK to save changes.
• Restart your PC.
• Repeat the same steps to re-enable Microsoft Print to PDF.

If the issue persists, we suggest that you perform the troubleshooting steps suggested on the link below under
Advanced:

Fix printer problems

Regards.

 

Error - Printing on Network printer

We have 4 printers on our Windows print server. The server was migrated from win2k3 to 2k8 on friday. 3/4 printers are working great, the other is having issues. When trying to print a test page to it, it gets a job status of Error - Printing.

When sending a small word document to it, it sends it to the printer, the queue is empty but nothing prints. If I goto the printer itself, it doesnt show any errors and I can print things such as information sheets and diagnostic files just fine.

All four printers are the same model, all 4 have a static IP. I can ping the printer successfully. I've tried printing from both an XP machine and the print server itself. I tried removing and adding the printer on the print server. And lastly, uunplugged the printer for 30 seconds, plugged it back in.

Any ideas?