Windows 10: Windows update, Asus

I had no idea what happened, because I had not enabled or installed BitLocker, a Windows encryption security service that requires you to enter a recovery key, which is associated with your Windows account.I checked my Windows account, which was associated with this device, and there were no keys to be found, and I am completely unable to access my laptop or files now. I talked with Asus support, and they had no access to any recovery keys either, and they telling me that it a Microsoft bug? can you help me solve the issue because Asus the only solution is sending it away for "repairs", which

:)

 

Asus AC68 PCI-E Wireless adapter not working after Windows update (Code 38)

As the title suggests, after the most recent Windows update (brought my version of Windows to 1803), my Asus AC68 PCI-E Wireless adapter ceased to function. According to Device Manager, it was a "code 38" error (Windows cannot load the device driver
for this hardware because a previous instance of the device driver is still in memory.)

Multiple searches have suggested that this is because of an issue with AMD processors, but this is not my situation as I have a Intel based processor.

I have attempted the following troubleshooting steps (without success)

• Uninstall and reinstall the driver
• Use to "PCI lock" function in msconfig
• Restore my computer to a previous state
• Delete the Asus software
• Change PCI port of my card

The only step I could take that did work was to restore a previous version of Windows (it brought me back to version 1709). So, for the moment my card works again, but my PC wants to update again, and I feel like this whole process will begin again if I
do so. For the record, I have already been in touch with Asus support, and they have been less than helpful (some of the steps taken above were at their suggestion). Thank you in advance for any advice.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.