Windows 10: Windows Update Fail and sfc scan found issues. Please Help

Discus and support Windows Update Fail and sfc scan found issues. Please Help in Windows 10 Gaming to solve the problem; Windows updates results in "something didn't go as planned..." going from 22H2 to 23H2. I tried the disk partition method and troubleshooting windows... Discussion in 'Windows 10 Gaming' started by JayKay712, Jan 24, 2025.

  1. JayKay712 Win User

    Windows Update Fail and sfc scan found issues. Please Help


    Windows updates results in "something didn't go as planned..." going from 22H2 to 23H2. I tried the disk partition method and troubleshooting windows update. They did not work. I also tried sfc /scannow and I got the following: Windows Resource Protection found corrupt files but was unable to fix some of them. For online repairs, details are included in the CBS log file located at windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline repairs,

    :)
     
    JayKay712, Jan 24, 2025
    #1

  2. Windows 10 fails to update


    Thanks,

    The Users list compared to the Profile list you posted earlier tell me there is not an issue with Users (a known issue where there is a profile in the list, but not actual User folder).

    The error code suggests corruption in the CBS manifest:
    Try these steps one at time until the issue is resolved or you run out of steps.

    Is Windows activated?
    No? Activate Windows 10

    Launch Command Prompt (Admin)
    enter the following line
    reg query HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate /s
    If DisableWindowsUpdateAccess REG_DWORD 0x1

    launch regedit
    navigate to HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate
    change the value of DisableWindowsUpdateAccess to 0
    exit regedit
    exit Command Prompt

    Launch Windows Update

    Try the next suggestion if the issue is not resolved.

    Restore health to the component store
    DISM - Repair Windows 10 Image
    Step 6. To Use DISM /RestoreHealth /Source:wim Command
    - OR -
    Step 7. To Use DISM /RestoreHealth /Source:esd Command
    Check System Files
    SFC Command - Run in Windows 10
    Read the front material, then
    follow >> OPTION THREE <<
    To Run SFC /SCANNOW Command in Windows 10

    If there are integrity issues reported on screen,
    Follow the instructions in >> OPTION FIVE <<
    To View Only the "SFC" Scan Results from the CBS.LOG

    If there are no integrity errors, Launch Windows Update

    Try the next suggestion if the issue is not resolved.

    Paste the following line into the address bar of File Explorer
    Control Panel\All Control Panel Items\TroubleshootingLaunch System and Security > Fix problems with Windows Update
    Press Advanced
    Select Run as administrator
    Press Next

    Launch Windows Update

    Try the next suggestion if the issue is not resolved.

    Automatically reset Windows Update components
    Download and run MS Windows Update diagnostic cab (direct download)

    Launch Windows Update

    Try the next suggestion if the issue is not resolved.

    Manually reset Windows Updates via batch file

    Windows Update - Reset in Windows 10

    Launch Windows Update
     
    Slartybart, Jan 24, 2025
    #2
  3. AsRock Win User
    Windows Updates failed to instal

    I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

    Step 1 Register DLL files.

    =================

    By trying this step, we can check if the update engines are working properly.



    1. Close all instances of Internet Explorer.

    2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



    Note: There is a space between regsvr32 and atl.dll



    3. Similarly, one by one, register the files listed below:



    Regsvr32 msxml3.dll

    Regsvr32 wuapi.dll

    Regsvr32 wuaueng.dll

    Regsvr32 wuaueng1.dll

    Regsvr32 wups2.dll

    Regsvr32 wucltui.dll

    Regsvr32 wups.dll

    Regsvr32 wuweb.dll

    Regsvr32 qmgr.dll

    Regsvr32 qmgrprxy.dll

    Regsvr32 jscript.dll



    Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



    If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



    Step 2 Verify the relevant Windows Update services.

    =========================================

    1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

    2. Double click the service "Automatic Updates".

    3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

    4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

    5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

    6. Then please click the button "Start" under "Service Status" to start the service.

    7. Please repeat the above steps with the other services:



    Background Intelligent Transfer Service

    Event Log

    Remote Procedure Call (RPC)



    Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



    If it still does not help, let's proceed to step 3.



    Step 3 Reload the Update temporary folders.

    ===================================

    One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



    1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net stop WuAuServ



    2. Click Start, Run, type: %windir% and press Enter.

    3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

    4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net start WuAuServ



    Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.
     
    AsRock, Jan 24, 2025
    #3
  4. Windows Update Fail and sfc scan found issues. Please Help

    Windows 10 fails to update


    When you finish testing the Avast suggestion, make sure that you restart your machine.

    Then if the issue persists, please return to the trouble shooting list in post# 89

    I think there are three steps that remain; the WU troubleshooter, reset WU components, and manual WU reset.
     
    Slartybart, Jan 24, 2025
    #4
Thema:

Windows Update Fail and sfc scan found issues. Please Help

Loading...
  1. Windows Update Fail and sfc scan found issues. Please Help - Similar Threads - Update Fail sfc

  2. Windows Update Fail and sfc scan found issues. Please Help

    in Windows 10 Software and Apps
    Windows Update Fail and sfc scan found issues. Please Help: Windows updates results in "something didn't go as planned..." going from 22H2 to 23H2. I tried the disk partition method and troubleshooting windows update. They did not work. I also tried sfc /scannow and I got the following: Windows Resource Protection found corrupt files...
  3. Issues with failing SFC

    in Windows 10 Gaming
    Issues with failing SFC: I have been having consisten issues with my PC crashing and blue screening with the stop code "CACHE MANAGER" and "IRQL_NOT_LESS_OR_EQUAL" Ive replaced my PSU before because that was the used-to-be- problem, and ive looked and seen that the cache manager bluescreen is related...
  4. Issues with failing SFC

    in Windows 10 Software and Apps
    Issues with failing SFC: I have been having consisten issues with my PC crashing and blue screening with the stop code "CACHE MANAGER" and "IRQL_NOT_LESS_OR_EQUAL" Ive replaced my PSU before because that was the used-to-be- problem, and ive looked and seen that the cache manager bluescreen is related...
  5. Please help! sfc/ scannow found corrupt files.

    in Windows 10 BSOD Crashes and Debugging
    Please help! sfc/ scannow found corrupt files.: I found errors in my system when I ran `sfc /scannow` . Is their a problem in my computer? My computer is brand new with a fresh install of windows 10 with no added things. So how did I get errors in my system? Please help me....
  6. Please help! sfc/ scannow found corrupt files.

    in Windows 10 Gaming
    Please help! sfc/ scannow found corrupt files.: I found errors in my system when I ran `sfc /scannow` . Is their a problem in my computer? My computer is brand new with a fresh install of windows 10 with no added things. So how did I get errors in my system? Please help me....
  7. Please help! sfc/ scannow found corrupt files.

    in Windows 10 Software and Apps
    Please help! sfc/ scannow found corrupt files.: I found errors in my system when I ran `sfc /scannow` . Is their a problem in my computer? My computer is brand new with a fresh install of windows 10 with no added things. So how did I get errors in my system? Please help me....
  8. sfc scan now help

    in Windows 10 Customization
    sfc scan now help: windows has found non reparable files. here is my code. is this a real code or a virus? how would i fix? 2021-04-19 19:06:33, Info CSI 00000153 [SR] Cannot repair member file [l:39]'InputApp\Assets\BadgeLogo.scale-150.png' of...
  9. Found corrupt files (SFC scan)

    in Windows 10 Performance & Maintenance
    Found corrupt files (SFC scan): Was on Win 8.1 and found nothing of the sort "windows did not find any integrity violations". Upgraded to windows 10 and boom "Windows Resource Protection found corrupt files but was unable to fix some of them." Full DISM log: http://filebin.ca/2SEZKHF2uc6o 36138
  10. SFC Scan Found Corrupt Files...

    in Windows 10 Performance & Maintenance
    SFC Scan Found Corrupt Files...: As the thread title states. However, my system is running and booting up as it should. This corruption has me concerned. Here's a screenshot of the CMD, after running scf /scannow. [img] I also ran the command, DISM /Online /Cleanup-Image /RestoreHealth Which...