Windows 10: Windows Update KB5001330 unable to install. Fails everytime the PC restarts.

Discus and support Windows Update KB5001330 unable to install. Fails everytime the PC restarts. in Windows 10 Installation and Upgrade to solve the problem; Hey, I've been facing a problem with upgrading my PC to the cumulative update KB5001330. I read an article regarding this that many people have been... Discussion in 'Windows 10 Installation and Upgrade' started by Dikshant Agrawal, Apr 24, 2021.

  1. Windows Update KB5001330 unable to install. Fails everytime the PC restarts.


    Hey, I've been facing a problem with upgrading my PC to the cumulative update KB5001330. I read an article regarding this that many people have been facing the issue but I didn't have a solution for it. I asked 2 questions regarding this but the response was the methods and I tried all of them but they didn't work. Please help me

    :)
     
    Dikshant Agrawal, Apr 24, 2021
    #1
  2. jds21 Win User

    Windows Updates failed to instal

    I just did step one and they have just all installed.... thank you so much.... it was quite frustrating having that update window pop up every 5 minutes and failing to instal every time

    Thanks mate
     
    jds21, Apr 24, 2021
    #2
  3. AsRock Win User
    Windows Updates failed to instal

    I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

    Step 1 Register DLL files.

    =================

    By trying this step, we can check if the update engines are working properly.



    1. Close all instances of Internet Explorer.

    2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



    Note: There is a space between regsvr32 and atl.dll



    3. Similarly, one by one, register the files listed below:



    Regsvr32 msxml3.dll

    Regsvr32 wuapi.dll

    Regsvr32 wuaueng.dll

    Regsvr32 wuaueng1.dll

    Regsvr32 wups2.dll

    Regsvr32 wucltui.dll

    Regsvr32 wups.dll

    Regsvr32 wuweb.dll

    Regsvr32 qmgr.dll

    Regsvr32 qmgrprxy.dll

    Regsvr32 jscript.dll



    Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



    If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



    Step 2 Verify the relevant Windows Update services.

    =========================================

    1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

    2. Double click the service "Automatic Updates".

    3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

    4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

    5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

    6. Then please click the button "Start" under "Service Status" to start the service.

    7. Please repeat the above steps with the other services:



    Background Intelligent Transfer Service

    Event Log

    Remote Procedure Call (RPC)



    Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



    If it still does not help, let's proceed to step 3.



    Step 3 Reload the Update temporary folders.

    ===================================

    One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



    1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net stop WuAuServ



    2. Click Start, Run, type: %windir% and press Enter.

    3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

    4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net start WuAuServ



    Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.
     
    AsRock, Apr 24, 2021
    #3
  4. Tatty_One Win User

    Windows Update KB5001330 unable to install. Fails everytime the PC restarts.

    Windows Update keeps failing!

    I have the exact same problem, I don't wanna hijack this thread so I will be brief........ One day about 10 days ago, out of the blue I started up my PC and Windows 7 failed to boot, I got to the Windows logo but then an error message telling me that there was no active user profile available, after several attempts at safe mode, Windows boot CD and the recovery console I gave up and did a complete fresh install onto my SSD.

    Once I had loaded all my drivers etc, I started update.... on first pass update downloaded 14 updates, restarted the PC, installed them and all was well, it then automatically went into update mode again and downloaded 83 updates (my version is pre SP1), since then after about 25 attempts it has been unable on restart to configure the updates and automatically "reverts" back, I have just got to the point that I have disabled updates completely.
     
    Tatty_One, Apr 24, 2021
    #4
Thema:

Windows Update KB5001330 unable to install. Fails everytime the PC restarts.

Loading...
  1. Windows Update KB5001330 unable to install. Fails everytime the PC restarts. - Similar Threads - Update KB5001330 unable

  2. Windows Update installation fails at 7% everytime.

    in Windows 10 Gaming
    Windows Update installation fails at 7% everytime.: Hello, I am having an issue with Windows Update, the update downloads and installs fine, but once I try restarting and installing the update it gets to 7% and fails everytime. I then get the message "We couldnt complete the updates. Undoing changes.". Windows Update gives me...
  3. Windows Update installation fails at 7% everytime.

    in Windows 10 Installation and Upgrade
    Windows Update installation fails at 7% everytime.: Hello, I am having an issue with Windows Update, the update downloads and installs fine, but once I try restarting and installing the update it gets to 7% and fails everytime. I then get the message "We couldnt complete the updates. Undoing changes.". Windows Update gives me...
  4. Unable to Install Windows Update KB5001330 and KB 5001391

    in Windows 10 Installation and Upgrade
    Unable to Install Windows Update KB5001330 and KB 5001391: Hi, I've been having this issue for months now, Windows update keeps saying I have to install these 2 updates KB5001330 and KB 5001391 but when I try to install them, it does not work. I have tried alternative workarounds such as installing them manually and restarting the...
  5. Unable to install KB5001330

    in Windows 10 Installation and Upgrade
    Unable to install KB5001330: I am unable to install this Cumulative update after many attempts. I have reset my PC and various other steps and to no avail. Is there anything else I can do or do I just leave the update and hope my computer stops lagging? I get the error 0x800f0989 after failure....
  6. Unable to install updates since before KB5001330

    in Windows 10 Installation and Upgrade
    Unable to install updates since before KB5001330: After many failed attempts to install updates in the past month, I'm getting pretty frustrated. At the end of each failed attempt, I get this error message with code:There were some problems installing updates, but we'll try again later. If you keep seeing this and want to...
  7. Windows update KB5001330 not installing

    in Windows 10 Installation and Upgrade
    Windows update KB5001330 not installing: Hey community i am getting a problem of windows update.i was planning to install KB5000802 update on 13 april 2021 but it was replaced with KB5001330 so i downloaded it and it stucked at 100%. Then i pause the update and resume it again. when it was downloaded it again stuck...
  8. Failed to install update KB5001330 - Error 0x8007000d

    in Windows 10 Installation and Upgrade
    Failed to install update KB5001330 - Error 0x8007000d: Error 0x8007000d when attempting to install KB5001330 2021-04 Cumulative Update for Windows 10 Version 20H2 for x64-based Systems No issues with DISM and SFC is fine. Other updates have installed fine. Below is the end of my CBS.log if it helps....
  9. A Question About Failed Update KB5001330

    in Windows 10 Installation and Upgrade
    A Question About Failed Update KB5001330: Guys, Going online and researching this, there are a ton of problems with update KB5001330. See my post here: If You are Running Windows 10 Version 2004, This Update May Not - Microsoft Community My system has been trying to install it multiple times for the last five...
  10. Update KB5001330 fails to install

    in Windows 10 Installation and Upgrade
    Update KB5001330 fails to install: As part of the current 'Patch Tuesday' windows updates there is a Cumulative update KB50001330. This update fails to install on my desktop PC with the error code 0x800f0984. My installation of Windows10 is insider build 19043.899, Version 21H1. The update fails to install...