Windows 10: Windows Update May 2020 - SSD stopped being recognized

I have a DELL G7. W10 was on SSD; It also has 1 Tb HDD with my data.


After the W10 update it stopped booting. After some time showing the logo, it shows a NO BOOTABLE DEVICE available.


Through F12 menu, I executed the Dell checkup - almost 7 hours; But all the hardware analysis was green.


I can see both SSD and HDD on BIOS ; On BIOS UEFI section I can see the filesystems of both - and the folders there, like Program Files and Windows. What I could not find was the bootx64.efi file.


I created a USB from MS site with a W10 install/repair.

I also created a USB from DELL site to reinstall/repair W10 - no luck either.

On both whenever I try, they cannot find the SSD - Thus, if I choose to repair the UEFI OR use the DISKPART command throught CMD prompt, nothing works.


I tried a lot of notes and videos but to no avail.


I saw notes saying about the disk format; But I did not change it AND I don't think W10 update would change it.

I am at a loss. I don't mind trying to reinstall W10 since I have a backup of the important data - and 99% of it is on HDD anyway.


Thanks,

:)

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.

 

SSD stops and freezes laptop

Couple of updates:

1. I created a Linux boot USB key, and monitored my SSD under Linux, so this is evidently not a Windows issue, and
2. I loaded new firmware for the SSD, and my system seems to be functioning normally now. What a pleasure using a PC that doesn't consistently freeze up.

Thanks to all y'all for your suggestions!

Regards,

Dave

 

Win10: windows update stuck at never ending loop ?

When in win10:

• Update&security -> Windows update -> Finding update... .... .... ....

Planning to download the latest Win10.ISO (vers.1803) and manually update:
- Then wait that my ordered new SSD arrives and clone the old HDD to it.