Windows 10: windows update was't successfull

Discus and support windows update was't successfull in Windows 10 Installation and Upgrade to solve the problem; i dont understand whats the problem is,whats happening,why its happening????!!!!!! please help me to solve this or help me how to solve... Discussion in 'Windows 10 Installation and Upgrade' started by Adham ZarifSeam, Feb 21, 2021.

  1. windows update was't successfull



    i dont understand whats the problem is,whats happening,why its happening????!!!!!!

    please help me to solve this or help me how to solve it.....pleaseeee!!!! windows update was't successfull 14465a3b-b266-47cb-8263-3d9cc75aaf48?upload=true.png

    :)
     
    Adham ZarifSeam, Feb 21, 2021
    #1
  2. 3Colors Win User

    Windows Updated(16299.309).KB4088776 Restart is required to complete.

    Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

    Thanks for the suggestions and for the time to respond windows update was't successfull :) Best regards.


    And thanks for the tip of that program, I'll have it on my list.
     
    3Colors, Feb 21, 2021
    #2
  3. AsRock Win User
    Windows Updates failed to instal

    I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

    Step 1 Register DLL files.

    =================

    By trying this step, we can check if the update engines are working properly.



    1. Close all instances of Internet Explorer.

    2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



    Note: There is a space between regsvr32 and atl.dll



    3. Similarly, one by one, register the files listed below:



    Regsvr32 msxml3.dll

    Regsvr32 wuapi.dll

    Regsvr32 wuaueng.dll

    Regsvr32 wuaueng1.dll

    Regsvr32 wups2.dll

    Regsvr32 wucltui.dll

    Regsvr32 wups.dll

    Regsvr32 wuweb.dll

    Regsvr32 qmgr.dll

    Regsvr32 qmgrprxy.dll

    Regsvr32 jscript.dll



    Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



    If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



    Step 2 Verify the relevant Windows Update services.

    =========================================

    1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

    2. Double click the service "Automatic Updates".

    3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

    4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

    5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

    6. Then please click the button "Start" under "Service Status" to start the service.

    7. Please repeat the above steps with the other services:



    Background Intelligent Transfer Service

    Event Log

    Remote Procedure Call (RPC)



    Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



    If it still does not help, let's proceed to step 3.



    Step 3 Reload the Update temporary folders.

    ===================================

    One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



    1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net stop WuAuServ



    2. Click Start, Run, type: %windir% and press Enter.

    3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

    4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



    Net start WuAuServ



    Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.
     
    AsRock, Feb 21, 2021
    #3
  4. KTR
    ktr Win User

    windows update was't successfull

    Windows updates won't install!

    I had the same problem when i repaired my O/S, i forgot the steps on how to fixed it, but it is in the microsoft support forum.

    You have to reinstall the windows updater, then restart the updating service.

    edit: Found it...http://support.microsoft.com/kb/943144
     
Thema:

windows update was't successfull

Loading...
  1. windows update was't successfull - Similar Threads - update was't successfull

  2. Deploy shared printer by GPO not successfull

    in Windows 10 Gaming
    Deploy shared printer by GPO not successfull: Dear Experts:In my company, some users have installed printer by IP address assume 192.168.1.10 and the port 192.168.1.10 was occupied. Printer driver also been installed. Others not installed the printer.Now we need to set the printing preference to default 2-sided&BW , so I...
  3. Deploy shared printer by GPO not successfull

    in Windows 10 Drivers and Hardware
    Deploy shared printer by GPO not successfull: Dear Experts:In my company, some users have installed printer by IP address assume 192.168.1.10 and the port 192.168.1.10 was occupied. Printer driver also been installed. Others not installed the printer.Now we need to set the printing preference to default 2-sided&BW , so I...
  4. Deploy shared printer by GPO not successfull

    in Windows 10 Software and Apps
    Deploy shared printer by GPO not successfull: Dear Experts:In my company, some users have installed printer by IP address assume 192.168.1.10 and the port 192.168.1.10 was occupied. Printer driver also been installed. Others not installed the printer.Now we need to set the printing preference to default 2-sided&BW , so I...
  5. disk clean up fails at 20 %, but says successfull

    in Windows 10 Gaming
    disk clean up fails at 20 %, but says successfull: i am trying to do windows cleanup and i am using Dism.exe /online /Cleanup-Image /StartComponentCleanup or Dism.exe /online /Cleanup-Image /SPSuperseded .After 20 percent, it says successfully...But the space is not reduced. I have tried sfc /scannow and restore health...But...
  6. disk clean up fails at 20 %, but says successfull

    in Windows 10 Software and Apps
    disk clean up fails at 20 %, but says successfull: i am trying to do windows cleanup and i am using Dism.exe /online /Cleanup-Image /StartComponentCleanup or Dism.exe /online /Cleanup-Image /SPSuperseded .After 20 percent, it says successfully...But the space is not reduced. I have tried sfc /scannow and restore health...But...
  7. Windows 10 Version Update to 1909 Is not Successfull

    in Windows 10 Installation and Upgrade
    Windows 10 Version Update to 1909 Is not Successfull: I am having trouble updating my Windows10 pro current version 1809 to 1909. After download and install , it prompts for restart to complete update. After restart update reaches 25% then without any error computer is getting shut down , when i tried to turn on widows changes...
  8. Three successfull installations of KB4530684

    in Windows 10 Updates and Activation
    Three successfull installations of KB4530684: As said, KB4530684 (2019-12 cumulative update is three times offered and three times successfully installed. In contrast, 2020-01 cumulative update is not yet offered. Any action to be taken, or just wait? Windows 64 bit Pro v1909 149359
  9. Upgrade from Windows 7 prof to Windows 10 prof is not successfull

    in Windows 10 Installation and Upgrade
    Upgrade from Windows 7 prof to Windows 10 prof is not successfull: I tried to upgrade my Windows 7 prof to Windows 10 prof by MediaCreationTool1909. Without success. I got only this error message: Error Code 0x8007042B - 0x3000D, The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation. "Help" from...
  10. Bluetooth speaker connection successfull but no audio out

    in Windows 10 Drivers and Hardware
    Bluetooth speaker connection successfull but no audio out: you see from the above pic am able to connect jbl successfully and able to get audio out but my Anker Soundcore 2 speaker is connecting but there is no audio out of it. Any help will be appreciated. Thanks, Niroop....