Windows 10: Windows recovery usb, can not complete due to no internet.

I've lost my original windows 10 pro during updates. I had to completely format C, and now trying to complete recovery from usb. But it stops and asks for wifi or ethernet connection. I have good wifi and a good ethernet connection on all my other devices. But, it still will not go past this point.

:)

 

Windows 10 recovery USB - which size???

Not even that. What creating a recovery drive does (if you select 'include system files') is to construct the files required to clean install Windows. If this is made on an OEM install these file will include the OEM custom apps and drivers - effectively a 'factory reset' drive. It is extracting an install image from your existing system files that takes the time.

The steps in making a recovery drive are shown in this tutorial...

Create Recovery Drive in Windows 10 | Tutorials

• first you choose whether or not to include system files (step 5 in tutorial)
• next the recovery drive files are constructed (this can take a long time if you include system files)
• only after that is complete will you be asked which usb to use (step 6 in tutorial). At this point you will be told how large a usb you need.

Without system files 512 Mb is sufficient. Including system files it will be just over 4GB.

At which step did you get the error? If you were not asked which usb to use then it was the construction of the system files that failed, nothing to do with what usb you had.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk