Windows 10: BSOD - Critical process died

Could it be a windows 10 issue with a new update or something...? Like 4 real, I am going crazy... With a normal computer a clean windows install would fix all your software problems, so I dont understand. And my computer specs are not that old, 5 months maybe. Except 2 of the RAM sticks, the SSD and the HDD. And the PSU i got 4 chrismas. Maybe I should just wipe the ssd and try not to update to windows 10, but just stay on windows 8.1

 

Okey, I have no idea what the problem is... I have tried so many things now, but 4 real, no I am giving up.... I gonna need help with this one.... I just hope it is not a hardware issue, cause I really dont have any money to fix it atm... *Sad
Maybe is should try to set on some new thermal paste on the cpu, maybe that helps. I am not so sure that when I installed the watercooling that I did it properly. I have had some freezing problems before, maybe it is cause of that.

 

Take care of the motherboard, processor and RAM.

We cannot test the motherboard, but the processor and RAM can be tested.

If you can do these tests and it comes with no errors, then you need to think about the motherboard.

 

okey, so what I am suppose to do is boot up using the Windows 10 Recovery Tools - Bootable Rescue Disk, and then test the RAM and CPU, and report back to u guys, right ?
Maybe it is a software error, or something with the SSD. I mean if u think about it, it never freez when I am booting with the Windows 10 Recovery Tools - Bootable Rescue Disk. Anyway, I will test the RAM and the CPU and give u guys the report. I did use a tool inside the Windows 10 Recovery Tools - Bootable Rescue Diskwhich said that the health of the SSD and the HDD was "GOOD", but I dont know if that can be trusted.

 

If you suspect the SSD, please make it sure that it is having the latest firmware.

Also, if you have a spare HDD, install windows on it and see how it goes. Because we cannot test the SSD with the conventional disk check tools. The elimination test works the best.

 

"The elimination test" - is that a software? Is SSDlife something I can use to test my SSD ?

 

I did mean hardware error, not software, my bad...

 

Okey, I did try to run the prime95 and seconds after, the pc froze... Will try to boot up again and start a new strestest.

Jupp, everytime I try to stress test, the computer freez... Could it be vcore that is to low or anything ? I dont think it gets overheated. I have a Nepton 240m cooler and 3 fans infront of the case so it should be good air flow. And the motherboard should be a problem either, it's a Asus Sabertooth 990FX R2.0

 

Okey, I went into the BIOS and I could see that everything was set on manual, so I truned manual off, and set it on auto. I booted up and I downloaded prime95 and Open Hardware Monitor. It sema like everything is working fine now. All my 8 cores are running at 100% and the temp is raising. I will tell when it rich the max.

Okey, it did rich 49,3 C, but it froze again....

 

Okey, I went into the bios again, and I found a button that loaded the default values and it sems to work even better now, riched over 60 degress C and still no freeze.

OKey, I know u should stresstres for a long period, but I dont got time 4 this, I wana play some games ! GRRR...! I am just gonna turn off the system, load windows 10 iso and start installing windows 10. Hopefullt this time, everything is perfect and God is watch over my computer.

 

Jupp, every single software is installed and not even a single freeze ! So I can now say I am a pro pc fixer and all that stuff, and thanks 4 the help and my the force be with u !

 

*Thumbs And here is the fix!!

Great job, indeed!!!