Windows 10: BSOD Only when playing Siege. NtosKRNL.exe

Hi,

When I play other games rather than Siege I don't get a BSOD. I tried updating all my drivers and also updated my BIOS.
To no avail it didn't get fixed.


Here are my specs:

Mobo: ASUS MAXIMUS VII Hero
CPU: Intel Core i7-4770k
PSU: Corsair RM850
RAM: Corsair vengeance DDR3-1866mhz
Storage: Seagate 1TB
SSD1(OS) ADATA 120GB
SSD2 Samsung EVO 250gb
GPU: ASUS Geforce GTX 1060 6GB


Here are the logs:

:)

 

Unresponsive mouse followed by beep noise.

The problem is rainbow six siege and uplay. I have this exact issue when I'm playing rainbow six siege on the latest Windows 10 update. But usually only happens if I let my wireless Xbox one controller shut off with the wireless dongle. The mouse will
become unresponsive/slow and when I click it makes a bunch of beeping noises and doesn't actually click anything. Hard resetting my PC is the only fix for it.

 

BSOD When playing certain games

I hadn't had any BSODs for a while up until today. I decided I'd play a game of Rainbow Six Siege, and received one and then decided to play some Battlefield 4 and received one. I have no experience
in solving BSOD issues, so that's why I've came here to ask for help. Both of the Minidumps are located here: Shared items 11-14-2016 If
anyone could assist me with these I'd be very grateful. Thankyou

 

Hello FraikzZ,

Welcome to TenForums *Smile

Three of the six crash dumps that are recorded in the logs show 0x124 hardware errors. Please run through the following tests and report back on the results. One of the dumps indicated a Malwarebytes driver might be a cause. You should uninstall Malwarebytes while you are troubleshooting. If you used a driver update program I have to warn you that these are not recommended by the analysts here since they so often introduce more problems than they are worth. Only update drivers from the manufacturers website or via Windows update. To be sure you have not harmed your system I would roll back any drivers you updated via a non-standard process.






STOP 0x124 Troubleshooting

Read carefully before proceeding.

*Arrow Run Prime95 - Stress Test Your CPU - Windows 10 Forums

*Arrow Run MemTest86+ - Test RAM - Windows 10 Forums

*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR

GPU TEST
*Arrow Run FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

 

Hi,

Thanks for the reply.
I did the things you've mentioned and ran Prime95 for 5 hours straight and also did the Furmark test with no BSOD of both.

I uploaded the HDTune tests as a attachment.

EDIT: I've tried to run a couple of games simultaneously to get the RAM usage up and it BSOD instantly. Will test with memtest86+ later.

Greetings,

 

Update: I brought the RAM to the retailer and they said it was faulty. I'll be getting new RAM soon from them.


Thanks for the help!