Windows 10: BSOD within 5 minutes of waking up Windows from sleep

I get a BSOD whenever I come back to my computer and wake it up. But if I haven't let the computer go to sleep it keeps going as long as I have been able to observe. The BSOD message/error code isn't consistent.

Note: Video drivers are tricky cause AMD stopped supporting my card as far as I know, so it always alternates between the recommended 15.301.1901 and the 16.50.2011 (Beta). Checked just now and it's on the 15 and wants to update to 16.50.2011. Doing that right now.

Attachment 121206

:)

 

IRQL_NOT_LESS_OR_EQUAL BSOD in Windows 10 after wake up from sleep

I have this issue with BSOD on my computer whenever my system wakes up from sleep. It usually happen after awhile after wakes up from sleep (sometimes within half an hour or hours of used). If I never sleep my system (meaning always start from fresh restart),
no issue with BSOD.

Attached is my minidump file.

https://onedrive.live.com/redir?resid=BBBE2E771BBAFCCB!4719&authkey=!ACl6Tb3NwjlChdE&ithint=file,dmp

Anyone can give a hand here?

 

Cpu Usage by LockAppHost.exe

I'm seeing LockAppHost running high CPU for several minutes after wake-from-sleep. Surface Pro 3. On wake from sleep the computer is unusable for about 5 minutes. Argh!

 

Hii TheKeyofFMinor,

Please make sure that the default options are loaded in the BIOS and perform below tests.






Diagnostic Test

CPU TEST
*Arrow Run Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run SeaTools DOS to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.
*Arrow Run chkdsk
Disk Check - Windows 7 Help Forums
Use option TWO with parameter /r
Upload the chkdsk log *Arrow http://www.sevenforums.com/tutorials...iewer-log.html






Diagnostic test

GPU TEST


Run Furmark tutorial



Note Run Furmark for around 30 minutes



Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high
When finished, make a photo/screenshot of Furmark and post it.

In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor

• the frequency of the GPU,
• the GPU memory clock,
• the temperature,
• the power,
• the load on the GPU,
• Etc.

I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.


Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.
In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.







Code: 3: kd> .cxr 0xffff96815db60f90 rax=ffffc50f020800c8 rbx=0000000000000000 rcx=ff7fc50f0048dde0 rdx=ffffc50f020800c8 rsi=ffffc50f0048de30 rdi=ffffc50f020800c0 rip=fffff8002e59103a rsp=ffff96815db619a0 rbp=0000000000000000 r8=0000000000000000 r9=ffff96815db61a24 r10=ffffc50f04049080 r11=0000000000000001 r12=00000086528ff200 r13=0000000000000100 r14=ffffc50f020800b0 r15=ffffaa04d1e60d30 iopl=0 nv up ei ng nz ac pe cy cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010293 nt!EtwpReceiveNotification+0xbe: fffff800`2e59103a 48397108 cmp qword ptr [rcx+8],rsi ds:002b:ff7fc50f`0048dde8=???????????????? 3: kd> .formats fffff8002e59103a; .formats ff7fc50f0048dde0 Evaluate expression: Hex: fffff800`2e59103a Decimal: -8795315433414 Octal: 1777777600005626210072 Binary: 11111111 11111111 11111000 00000000 00101110 01011001 00010000 00111010 Chars: .....Y.: Time: ***** Invalid FILETIME Float: low 4.93545e-011 high -1.#QNAN Double: -1.#QNAN Evaluate expression: Hex: ff7fc50f`0048dde0 Decimal: -36093603775717920 Octal: 1775776120740022156740 Binary: 11111111 01111111 11000101 00001111 00000000 01001000 11011101 11100000 Chars: ....H.. Time: ***** Invalid FILETIME Float: low 6.69175e-039 high -3.39976e+038 Double: -1.39434e+306[/quote]