Windows 10: Multiple BSODS within 2 days need solution ASAP

I think so, I'll send the two most recent dumps. Thanks a ton in advance!

 

Please be sure about it: WinDBG - Install Configure - Windows 10 Forums

The dump you posted is a verifier dump (0xC4)
You can see verifier is enabled
Code: DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP[/quote] The 0xC4 crash can however occur with and without verifier enabled.

If you have followed my instructions above, then it is a good idea to stress test the GPU





Diagnostic test

GPU TEST


Run Furmark tutorial



Note Run Furmark for around 30 minutes



Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:

 

The 0xC4 crash can however occur with and without verifier enabled.

If you have followed my instructions above, then it is a good idea to stress test the GPU





Diagnostic test

GPU TEST[/quote]


Run Furmark tutorial



Note Run Furmark for around 30 minutes



Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:





Alright, I'll start up FurMark, does it leave some sort of diagnostic file after it's done running? Also I disabled verifier as of now. I'll put my specs on my page then take care of DDU

 

You only need to focus on artifacts and the temps.
You need to keep a keen eye on for monitoring what makes a log not necessary *Smile

 

So I ran Furmark. my fans were going 73 percent. Made a screenshot, where are the screenshots located under Furmark? I'm also taking care of DDU right now I'll keep you posted

 

You need to save the screenshot first before you can use it, you can save it by using a program like Paint.
In Paint paste (copy/paste) the screenshot to save it.

 

I guess I lost the screen shot. I'll have to run Furmark again? I also used DDU and installed the latest drivers. I unchecked the options to install the other things that came with the AMD install. At least I think I did, there was an option I couldn't uncheck which I believe was the install wizard or something like that

 

No screenshot is needed.

Please check your specs and make sure it is correct, according to your specs your CPU is your CPU and motherboard *Wink

 

Oh darn! I'll check up on that.

 

By the way, I'm just waiting on my PC to goof up to confirm if the AMD drivers were causing the issues. Is this also caused by AMD? "Probably caused by : ntoskrnl.exe ( nt+142760 )"

 

Upload a dump and I can check it.

 

I can tell you, Windows files are rarely the real case especially with the ntoskrnl.exe
Windows files are usually blamed when they are the last active, but that doesn't make them the root cause.

Following list is a list of drivers that are old.
Please note, some drivers may not be present on your system, but I don't know why they are present in the drivers list in the dump.
Driver Reference Table - anodlwfx.sys
Driver Reference Table - npf.sys
Driver Reference Table - evolve.sys
Driver Reference Table - usbfilter.sys - possible part of the chipset, check ASUS for chipset drivers
Driver Reference Table - asstor64.sys - check ASUS for sata drivers

Please clean reinstall MalwarebytesClean removal: https://support.malwarebytes.org/cus...5311?b_id=6438
Install: Free Cyber Security & Anti-Malware Software

 

Okay, I'm uninstalling Malawarebytes. How does one update chipset drivers?

 

Simply by downloading the drivers, opening the executable and reboot the system.
Pretty much the same as every other driver, but some don't require a reboot.

 

Where can I find these for my specific hardware? I also got another dump which happened last night. Only reason I send these over to you is because I still get the symbol issues.