Windows 10: Sudden return of BSOD

additionally here a the benchmark and health reports from the 2TB drives. I have not been able to complete an error scan as they take so long my system usually crashes before completion.

 

Diagnostic Test

DRIVER VERIFIER


Warning Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.



Note Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.

 

Sorry for the slow response. I ran Driver Verifier and it went a whole day and a half before it finally crashed again.

Here is the latest error reports.

 

That is unfortunate, driver verifier caused the 0x1A crash but no driver has been flagged. This indicates we're dealing with another problem which usually is hardware.
Lets try a standard test for the 0x1A






Diagnostic Test

RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.

 

memtest86 returned some errors, I'm trying to narrow it down to which stick is causing the error. Hopefully once that has been removed or replaced it will solve my issue.

 

I have found the faulty stick of RAM. I believe that was causing the issue. Thank you very much for all your help axe0.

I'm going to go ahead and mark this as solved.