Windows 10: Windows 10 Fall Creators (1709) Update Issues

I am having issues updating from 1703 to 1709, and I could use some help.

I used the native Windows Update tool to download 1709. I restarted my computer when prompted to begin the installation. I got about a quarter of the way through the installation when I got a blue screen. The computer then reverted back to 1703 automatically.

I used the Windows 10 upgrade assistant tool, but that resulted in the same blue screen. (Also, I noticed that the tool mentioned that my computer was running a much older version of Windows 10 than is actually installed.)

I used the Windows Update Troubleshooter, which seems to have cleared most of the files in the "SoftwareDistribution" folder. After using the Update Troubleshooter, I tried using the upgrade assistant tool again, but it still failed. Now, when I used the native update tool, it says that my system is up to date. But that is impossible because I still haven't been able to download and install 1709.

Any suggestions? I have an HP Spectre x360.

:)

 

Windows10Upgrade on latest edition?

That folder is where the latest version called 'Fall Creators Update' install files might be stored.

1703 - Windows 10 Creators Update

1709 - Windows 10 Fall Creators Update

 

Computer Issue or....

Which version of Windows 10 is installed?

Is it the Windows 10 Fall Creators Update version 1709?

I'm not surprised you are having trouble with Windows 10 Fall Creators Update.

There seems to be some early adopter issues at this time with Windows 10 1709, if you can, I recommend you downgrade to your previous version until the Fall Creators Update matures with future cumulative updates.

Open Start > Settings > Update & security > Recovery > under Go back to my previous version of Windows 10, click Get started.

 

Hi, please post a screenshot of your partitions using Minitool partition wizard.

Please post your windows build:
Windows key + R, winver
Also a screenshot of your Update History.

What is your disk type? (HDD, SSD etc?)

Please make sure you have around 20Gb free on your C: drive, and 500Mb of unallocated space on your system drive.

1. First check your disk:
Download and run Hard Disk Sentinel (trial) and make sure all disks are reported as good.
If not, do not continue, and post back .

2. Now check your file system:

From an admin command or powershell prompt
[Windows key + X, click command prompt (admin)]
chkdsk C: /F
Your PC will need to restart.
Post back the result, which you can get after a restart as follows:
Read Chkdsk Log in Event Viewer in Windows 10 Performance Maintenance Tutorials
or
How to read Event Viewer log for Chkdsk in Windows 10 [Tip] | Reviews, news, tips, and tricks | dotTechdotTech
or
How do I see the results of a CHKDSK that ran on boot? - Ask Leo!
Make sure the result is clear or fixed- else do not proceed.

3. Now check your system files. From an admin command prompt
SFC /SCANNOW
and post the result.
Make sure the result is clear or fixed- else do not proceed.

What went wrong?
Then see this where many error numbers and messages are listed:
How to Troubleshoot Common Setup and Stop Errors During Windows - Microsoft Community

Trying again- preparation.
Note the guidance in the yellow section and Here's How:
Upgrade to Windows 10 Installation Upgrade Tutorials

 

Here is some more context: When I use the Windows Upgrade Tool, it gets to about 30 percent, restarts, then I get a BSOD saying "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED." I'm currently running Version 1703 (Build 15063.674) and I have a a SSD with plenty of space. The latest update I installed was "Security update for Adobe Flash Player: October 17, 2017" (KB4049179). I ran CHKDSK and got a message saying that "Windows has scanned the file system and found no problems."

 

I'm having same BSOD error message when trying to upgrade to Fall Creators update. BSOD has nothing to do with my computer hardware or software i have used same version of Windows 10 Creators Update to perform in-place upgrade it was successful. Looks like there is something wrong with latest version of the Fall Creators update.

 

Seems it may still be something to do with your hardware/software.

The same SYSTEM_THREAD_EXCEPTION_NOT_HANDLED problem was reported with 1703 as well. This thread looked into one example, diagnosing an Ethernet camera driver as the cause. Apparently this is where to look for clues....

https://answers.microsoft.com/en-us/...a-47866e9a7960

(I wouldn't know, as the upgrade worked perfectly for me so I don't have that folder)

 

I did check the log files there was no indication what cause the BSOD i have updated all my drivers funny think is that i have installed the Fall Creators update at my VM twice without problem.

 

Well it may help @burg716 to look for the cause of their problem.

Sounds like they should have that folder.

 

There is no BSOD memory dump file been created i have not come cross setupmem.dmp file. I will be clean installing Fall Creators update to see if something wrong with my computer.

 

I don’t see a memory dump file, but I see setuperr.log in Panther, and it seems the update got hung up on a network driver. Although, I am not an expert in analyzing that log file.

Anyway, I removed the network driver and I am trying the update again. I’ll let you know if that works.

 

Didn’t work. Still got the same error. What should I be looking for in the setuperr.log?

 

1) To troubleshoot the bsod please run the DM log collector and post a zip into the thread:
Language - Add, Remove, and Change in Windows 10 General Tips Tutorials
BSOD - Posting Instructions - Windows 10 Forums


2) To troubleshoot the failure to upgrade:
open file explorer > this PC > C: > click title bar view and check hidden files > search for any of the files and post into the thread using one drive or drop box share links:

C:\$WINDOWS.~BT\Sources\Panther
C:\Windows\Panther
setuperr.log
setupact.log
Setupmem.dmp .....[$Windows.~bt\Sources\Rollback\setupmem.dmp]
setupapi.dev.log ....[$Windows.~bt\Sources\Rollback\setupapi\setupapi.dev.log]
BlueBox.log
$Windows.~bt\Sources\Rollback*.evtx


C:\$Windows.~BT\Sources\Panther
C:\$Windows.~BT\Sources\Rollback

BlueBox.log
$Windows.~bt\Sources\Rollback\setupmem.dmp
$Windows.~bt\Sources\Rollback*.evtx
$Windows.~bt\Sources\Rollback\setupapi\setupapi.dev.log

Setupmem.dmp
setupapi.dev.log
Event logs (*.evtx)

3) Update the computer specs in the "My Computer" section:

How To Fill Out Your System Specs
How To Fill Out Your System Specs
System Specs - Fill in at Ten Forums:
System Specs - Fill in at Ten Forums General Tips Tutorials
In the left corner below in your post you find 'My System Specs'.
After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
System Info - See Your System Specs - Windows 7 Help Forums

Please include PSU, cooler, case, peripherals, etc. and anything attached to the computer by wired or wireless (mouse, keyboard, printer, headset, xbox, etc.)

 

Update fails regardless of the methods used (Automatic update, Update Assistant and ISO burnt on DVD).





See contents of setupact.log:

Code: 2017-12-10 18:27:17, Info MOUPG *************** SetupHost Logging Begin *************** 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: ModulePath = [C:\$WINDOWS.~BT\Sources] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: WorkingPath = [C:\$WINDOWS.~BT\Sources] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: LoggingPath = [C:\$WINDOWS.~BT\Sources\Panther] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: MediaPath = [G:] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: InstallFilePath = [G:\Sources\Install.esd] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: ActionListFilePath = [] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: CmdLine = [/Install /Media /InstallFile "G:\Sources\Install.esd" /MediaPath "G:"] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: Mode = [0x2] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: Scenario = [0x1] 2017-12-10 18:27:17, Info MOUPG SetupHost::Initialize: Flags = [0x800] 2017-12-10 18:27:17, Info MOUPG SetupHost: Setup build version is: 10.0.16299.15 (rs3_release.170928-1534) 2017-12-10 18:27:17, Info CONX pGetHostCSDBuildNumber: 'HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\CSDBuildNumber' does not exist. Assume 0 2017-12-10 18:27:17, Info CONX Host OS version: 10.0.15063.0 (0.0) Platform 0x2, SuiteMask 0x100, ProdType 0x1 2017-12-10 18:27:17, Info CONX Source OS: Host SKU Info: Edition = 'Professional', Edition Type = 'Client', Installation Type = 'Complete', Product Name = 'Windows 10 Pro', Arch = amd64, StationType = Client Workstation, Stage type = Staged Image 2017-12-10 18:27:18, Info MOUPG Host OS License State [ Genuine ] 2017-12-10 18:27:18, Info MOUPG Host OS Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Host OS Language Id [ 1031 ] 2017-12-10 18:27:18, Info MOUPG User UI Language Id [ 1031 ] 2017-12-10 18:27:18, Info MOUPG Host OS Edition [ Professional ] 2017-12-10 18:27:18, Info MOUPG Host OS Version [ 10.0.15063 ] 2017-12-10 18:27:18, Info MOUPG Host OS Build String [ 15063.0.amd64fre.rs2_release.170317-1834 ] 2017-12-10 18:27:18, Info MOUPG SetupHost: Creating setup mutex... 2017-12-10 18:27:18, Info MOUPG SetupHost::InitializeComponents 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$WINDOWS.~BT\Sources\MediaSetupUIMgr.dll]... 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading complete. 2017-12-10 18:27:18, Info MOUPG CInstallUI::Initialize 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading ID: [3d3ad714-f8d8-4c84-ad5f-10938c2f3339] from [C:\$WINDOWS.~BT\Sources\SetupCore.dll]... 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading complete. 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading AutomationManager manager... 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading ID: [edac948b-844e-4a51-9ba9-34520bd9ff9f] from [C:\$WINDOWS.~BT\Sources\SetupCore.dll]... 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading complete. 2017-12-10 18:27:18, Info MOUPG SetupHost: Looking for automation file... 2017-12-10 18:27:18, Info MOUPG SetupHost: Initializing automation... 2017-12-10 18:27:18, Info SP CSetupPlatform::Initialize: Setup log starts: 2017-12-10 18:27:18, Info SP Host system information: VM: NO Firmware type: PCAT Manufacturer: Hewlett-Packard Model : HP ProBook 4730s BIOS name : Default System BIOS BIOS version : 68SRR Ver. F.60 BIOS release date : 20150313000000.000000+000 Total memory : 8589934592 Number of physical CPUs : 1 Number of logical CPUs : 4 Processor manufacturer : GenuineIntel Processor name : Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz Processor caption : Intel64 Family 6 Model 42 Stepping 7 Processor architecture : x64 Processor clock : 2501 2017-12-10 18:27:18, Info SPVerifyFootprint: Starting verification of footprint section Footprint.Basic 2017-12-10 18:27:18, Info SPVerifyFootprint: Could not find footprint file C:\$WINDOWS.~BT\Sources\de-de\reagent.adml 2017-12-10 18:27:18, Info SPVerifyFootprint: The requested footprint is not present 2017-12-10 18:27:18, Warning SPGetFootprintCapabilities: Footprint [Footprint.Basic] incomplete; the platform capability will not be available 2017-12-10 18:27:18, Info SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.Servicing.amd64 2017-12-10 18:27:18, Info SPVerifyFootprint: Starting verification of footprint section Footprint.Servicing 2017-12-10 18:27:18, Info SPVerifyFootprint: Could not find footprint file C:\$WINDOWS.~BT\Sources\de-de\compatprovider.dll.mui 2017-12-10 18:27:18, Info SPVerifyFootprint: The requested footprint is not present 2017-12-10 18:27:18, Warning SPGetFootprintCapabilities: Footprint [Footprint.Servicing] incomplete; the platform capability will not be available 2017-12-10 18:27:18, Info SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.ICB.amd64 2017-12-10 18:27:18, Info SPVerifyFootprint: Starting verification of footprint section Footprint.ICB 2017-12-10 18:27:18, Info SPVerifyFootprint: Could not find footprint file C:\$WINDOWS.~BT\Sources\de-de\migres.dll.mui 2017-12-10 18:27:18, Info SPVerifyFootprint: The requested footprint is not present 2017-12-10 18:27:18, Warning SPGetFootprintCapabilities: Footprint [Footprint.ICB] incomplete; the platform capability will not be available 2017-12-10 18:27:18, Info SPGenerateCopyListFromConfigFile: Didn't find file list in C:\$WINDOWS.~BT\Sources\setupplatform.cfg, section Footprint.Migration.amd64 2017-12-10 18:27:18, Info SPVerifyFootprint: Starting verification of footprint section Footprint.Migration 2017-12-10 18:27:18, Info SPVerifyFootprint: Could not find footprint file C:\$WINDOWS.~BT\Sources\de-de\migres.dll.mui 2017-12-10 18:27:18, Info SPVerifyFootprint: The requested footprint is not present 2017-12-10 18:27:18, Warning SPGetFootprintCapabilities: Footprint [Footprint.Migration] incomplete; the platform capability will not be available 2017-12-10 18:27:18, Info Initializing diagnostics helper; data file = (NULL) 2017-12-10 18:27:18, Info No existing diagnostics data 2017-12-10 18:27:18, Info Key CollectTrace is not available. 2017-12-10 18:27:18, Warning SP CSetupPlatform::Initialize: Failed to initialize tracing 2017-12-10 18:27:18, Info VDS available 2017-12-10 18:27:18, Info Key CollectTrace is not available. 2017-12-10 18:27:18, Info SP Releasing the setup platform 2017-12-10 18:27:18, Info SP StopTelemetry: 0 2017-12-10 18:27:18, Info SP UploadTelemetryData: 0 2017-12-10 18:27:18, Info SP CorrelationVector: <NULL> 2017-12-10 18:27:18, Info SP Try to merge diagnostics data from default new system data file 2017-12-10 18:27:18, Info SP Skip merge diagnostics data since C:\$WINDOWS.~BT\Sources\Diagnostics\diagnostics.dat is not exist 2017-12-10 18:27:18, Info SP Finish merge diagnostics data 2017-12-10 18:27:18, Info SP Start uploading diagnostics data for setup platform 2017-12-10 18:27:18, Info SP Not opted-in to SQM. Diagnostics data will NOT be uploaded 2017-12-10 18:27:18, Info Key CollectTrace is not available. 2017-12-10 18:27:18, Info SP Closing Panther Logging 2017-12-10 18:27:18, Info MOUPG SetupHost: Automation information not found. Releasing automation object. 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading ID: [c7b6e4de-b741-42d8-ac05-16738c9e0bc5] from [C:\$WINDOWS.~BT\Sources\SetupMgr.dll]... 2017-12-10 18:27:18, Info MOUPG SetupHost: Loading complete. 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: WorkingPath = [C:\$WINDOWS.~BT\Sources] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: MediaPath = [G:] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: InstallFilePath = [G:\Sources\Install.esd] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: ActionListFilePath = [] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: Mode = [0x2] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: Scenario = [0x1] 2017-12-10 18:27:18, Info MOUPG SetupManager::Initialize: Flags = [0x800] 2017-12-10 18:27:18, Info MOUPG SetupManager: Working Directory: [C:\$WINDOWS.~BT\Sources] 2017-12-10 18:27:18, Info MOUPG SetupManager: Local Media Path: [C:\$WINDOWS.~BT] 2017-12-10 18:27:18, Info MOUPG SetupManager: Scratch Path: [C:\$WINDOWS.~BT\Sources\Panther] 2017-12-10 18:27:18, Info MOUPG SetupManager: ESD Download Path: [] 2017-12-10 18:27:18, Info MOUPG SetupManager: Media Path: [G:] 2017-12-10 18:27:18, Info MOUPG SetupManager: Drivers Path: [C:\$WINDOWS.~BT\Drivers] 2017-12-10 18:27:18, Info MOUPG SetupManager: LangPacks Path: [C:\$WINDOWS.~BT\LangPacks] 2017-12-10 18:27:18, Info MOUPG SetupManager: Install file found: [G:\Sources\Install.esd] 2017-12-10 18:27:18, Info MOUPG WIM Path [ G:\Sources\Install.esd ] 2017-12-10 18:27:18, Info MOUPG Image Count [ 8 ] 2017-12-10 18:27:18, Info MOUPG Install Count [ 8 ] 2017-12-10 18:27:18, Info MOUPG WinPE Count [ 0 ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 1 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ Cloud ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 2 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ CloudN ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 3 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ Core ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 4 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ CoreN ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 5 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ Education ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 6 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ EducationN ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 7 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ Professional ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG ------------------------- 2017-12-10 18:27:18, Info MOUPG Install Index [ 8 ] 2017-12-10 18:27:18, Info MOUPG Product Name [ Microsoft� Windows� Operating System ] 2017-12-10 18:27:18, Info MOUPG Version [ 10.0.16299 (15.0) ] 2017-12-10 18:27:18, Info MOUPG Architecture [ x64 ] 2017-12-10 18:27:18, Info MOUPG Edition [ ProfessionalN ] 2017-12-10 18:27:18, Info MOUPG Language [ de-DE ] 2017-12-10 18:27:18, Info MOUPG SetupCore::Initialize 2017-12-10 18:27:18, Info MOUPG SetupCore::RegisterSetupActions 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered IMAGE_EXIT action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DU_SETUP action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DU_IMAGE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_SYSREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_DOWNLOADREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DISKSPACE_DOWNLOADREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DISKSPACE_INSTALLREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_MIGCHOICE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered PKEY_VALIDATE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered EULA action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_INSTALLREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_FINALIZEREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DISK_PARTITION action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered COMPAT_RECOVERYREQ action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered ACTIVATION action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered SUMMARY action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered IMAGE_DEPLOY action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DRIVER_MIGRATE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DATA_MIGRATE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered PACKAGE_MIGRATE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered DEBUGGER_OPTIONS action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered PRE_FINALIZE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered IMAGE_FINALIZE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered BOOT_FINALIZE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered ADVERTISE action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered INSTALL_GET_WEBSETUP_USER_INPUT action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered MEDIA_CREATE_SUCCESS action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered PKEY_GET_EDITION action 2017-12-10 18:27:18, Info MOUPG SetupCore: Registered UPDATEMEDIA action 2017-12-10 18:27:18, Info MOUPG DlpMgrInit: WorkingPath = [C:\$WINDOWS.~BT\Sources\Panther], Disposition = [Open], Flags = [0x1], Diagnostics = [Yes], StockRegistrar = [Yes], UserRegistrar = [Yes] 2017-12-10 18:27:18, Info MOUPG DlpMgrInit: WorkingPath = [C:\$WINDOWS.~BT\Sources\Panther], Disposition = [Create], Flags = [0x1], Diagnostics = [Yes], StockRegistrar = [Yes], UserRegistrar = [Yes] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [1], Value = [9] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [2], Value = [1] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [4], Value = [2] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [17], Value = [131574004391527491] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [6], Value = [2] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [9], Value = [1] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [11], Value = [10.0.16299.15] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [12], Value = [6367f891-e05a-45d5-8d66-bc9284192491] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [15], Value = [35283089-fa23-4a73-97f2-9c25b9851376] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [13], Value = [0] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [10], Value = [5] 2017-12-10 18:27:19, Info MOUPG SetupManager: DiagnosticPrompt Enabled via detection. 2017-12-10 18:27:19, Info MOUPG SetupManager: Uninstall Enabled via host OS version. 2017-12-10 18:27:19, Info MOUPG SetupManager: PartitionResize Enabled by default. 2017-12-10 18:27:19, Info MOUPG SetupManager: MigRollback Enabled via scenario detection. 2017-12-10 18:27:19, Info MOUPG SetupManager: Target Drive Letter set to [C] via default. 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [16], Value = [0] 2017-12-10 18:27:19, Info MOUPG SetupHost: Attempting to initialize OneSettings values 2017-12-10 18:27:19, Info CONX Target OS version: 10.0.16299.15 2017-12-10 18:27:19, Info MOUPG SetupHost: OneSettings check succeeded, but no value found 2017-12-10 18:27:19, Info MOUPG SetupHost::Execute 2017-12-10 18:27:19, Info MOUPG Setup StudyID was [not found] 2017-12-10 18:27:19, Info MOUPG A previous StudyID was [not restored] 2017-12-10 18:27:19, Info MOUPG SetupManager::Execute called 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [3], Value = [0] 2017-12-10 18:27:19, Info MOUPG SetupManager: Reporting Data - DataId = [18], Value = [1] 2017-12-10 18:27:19, Info MOUPG SetupUI: Detecting connected standby capability... 2017-12-10 18:27:19, Info MOUPG SetupUI: Connected standby: [No] 2017-12-10 18:27:19, Info MOUPG SetupUI: Creating power request... 2017-12-10 18:27:19, Info MOUPG SetupUI: Calling PowerSetRequest with type [0x1]... 2017-12-10 18:27:19, Info MOUPG SetupUI: Power request granted! 2017-12-10 18:27:19, Info MOUPG SetupManager:etermineSetupPhase: CurrentSetupPhase [SetupPhaseUnpack] 2017-12-10 18:27:19, Info MOUPG Setup phase change: [SetupPhaseUnknown] -> [SetupPhaseUnpack] 2017-12-10 18:27:19, Info MOUPG SetupManager::OpenOrCreateTask: Creating new task [Unpack]. 2017-12-10 18:27:19, Info MOUPG CreateTask: Name = [Unpack], WorkingPath = [C:\$WINDOWS.~BT\Sources], TransportId = [00000000-0000-0000-0000-000000000000], Flags = [0x0] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Entering Prepare Method 2017-12-10 18:27:19, Info MOUPG MediaLayout: Leaving Prepare Method 2017-12-10 18:27:19, Info MOUPG SetupManager: InstallAttempts = [6] 2017-12-10 18:27:19, Info MOUPG DlpTask: Entering Execute Method 2017-12-10 18:27:19, Info MOUPG DlpTask: Transport not set. Skipping download phase. 2017-12-10 18:27:19, Info MOUPG DlpTask: Executing Actions... 2017-12-10 18:27:19, Info MOUPG Action execution thread timeout period: [1000 ms] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Initializing Source Layout Path: [G:] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Initializing Target Layout Path: [C:\$WINDOWS.~BT] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Initializing PreserveExistingFiles: [TRUE] 2017-12-10 18:27:19, Info MOUPG ProgressHandlerAction: Sending initial progress message for action [0]. 2017-12-10 18:27:19, Warning MOUPG CSetupDiagnostics::ReportData - Not reporting WINDLP data point [0x2002] 2017-12-10 18:27:19, Info MOUPG CInstallUI::OnActionChanged 2017-12-10 18:27:19, Info MOUPG CInstallUI::OnActionChanged: Posted MSG_INSTALLUI_UPDATE_PROGRESS 2017-12-10 18:27:19, Info MOUPG MediaLayout: Entering Execute Method 2017-12-10 18:27:19, Info MOUPG MediaLayout: Checking source layout path: [G:] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Checking target layout path: [C:\$WINDOWS.~BT] 2017-12-10 18:27:19, Info MOUPG MediaLayout: Calculating size of media path: [Boot]... 2017-12-10 18:27:20, Info MOUPG MediaLayout: Calculating size of media path: [Efi]... 2017-12-10 18:27:20, Info MOUPG MediaLayout: Calculating size of media path: [Sources]... 2017-12-10 18:27:28, Info MOUPG DlpTask: Resetting action [0] progress start time. 2017-12-10 18:27:28, Info MOUPG Action progress: [0%] 2017-12-10 18:27:28, Info MOUPG Task progress: [0%] 2017-12-10 18:27:28, Info MOUPG Overall progress: [0%] 2017-12-10 18:27:28, Info MOUPG Mapped Global progress: [0%] 2017-12-10 18:27:28, Info MOUPG Setup Phase: [3] 2017-12-10 18:27:28, Info MOUPG Setup SubPhase: [3] 2017-12-10 18:27:28, Info MOUPG MediaLayout: Copying layout path: [Boot]... 2017-12-10 19:11:06, Info MOUPG SetupUI: Returning TRUE to QueryEndSession [0x0] request... 2017-12-10 19:11:06, Info MOUPG SetupUI: Logging EndSession [0x0] notification...[/quote]

 

For the failed upgrade was there an error code or error message?

Please change the default language (back and forth) to get English as the default language.
Language - Add, Remove, and Change in Windows 10 General Tips Tutorials

Once the default language is English:


Open administrative powershell and copy and paste: Get-WindowsUpdateLog
It may take 5 - 10 minutes to process and then place txt on the desktop.
Post a one drive or drop box share link into the thread.
Share OneDrive files and folders - Office Support

Then view the Panther logs.
Submit them by one drive or drop box share links.
There should always be:
supererr
superact