Windows 10: BSOD caused by hal.dll

Hello!
So this Night my pc, Got a bsod and ever since then i try to start my pc, it will come again after sometime(not that long) so what i have tried to do is:
Run the system, with both of my ram(1 at a time), same issue.
Unplug my ssd with Windows and install Windows On my other ssd and while i was installing my gpu driver, same issue..

Bluescreenview: Screenshot - ff258e10820610016daab404083f5e97 - Gyazo

My specs:
I7 6700k
Corsair Vengeance LED DDR4 3200MHz 2x8GB
ASUS Z170 PRO GAMING/AURA
Cooler Master B700 VER.2, 700W PSU
Gigabyte GeForce GTX 970 4GB
Samsung 850 evo 250gb
NZXT Kraken x61

Thanks in advance!

:)

 

hal.dll+35f1f bsod error in Windows 10

OT- hal.dll+35f1f bsod

Hello,

There was a bsod just now, which is the first time I've experienced it - and should I be worrying about it?

This is what I got from BlueScreenView:

071816-24656-01.dmp

18/7/2016 8:23:23 PM

0x00000124

00000000`00000000

ffffe000`2db12028

00000000`b2000000

00000000`00100402

hal.dll

hal.dll+35f1f

x64

ntoskrnl.exe+142940

C:\WINDOWS\Minidump\071816-24656-01.dmp

What caused this? Thanks!

 

BSOD, Bug check code 0x00000133, caused by driver hal.dll

Lenovo ThinkPad with Intel i-7 processor, 8GB RAM, Windows 10 professional edition, suddenly crashed with BSOD, Bug check code 0x00000133, caused by driver hal.dll

Attached is the minidump file.

Any hints an to what might have caused the problem ?

 

Hardware machine check.

Code: WHEA_UNCORRECTABLE_ERROR (124) A fatal hardware error has occurred. Parameter 1 identifies the type of error source that reported the error. Parameter 2 holds the address of the WHEA_ERROR_RECORD structure that describes the error conditon. Arguments: Arg1: 0000000000000000, Machine Check Exception Arg2: ffffda84e4118028, Address of the WHEA_ERROR_RECORD structure. Arg3: 00000000f6101400, High order 32-bits of the MCi_STATUS value. Arg4: 0000000000040150, Low order 32-bits of the MCi_STATUS value[/quote] Code: 7: kd> !errrec ffffda84e4118028 =============================================================================== Common Platform Error Record @ ffffda84e4118028 ------------------------------------------------------------------------------- Record Id : 01d26ac43e4b7058 Severity : Fatal (1) Length : 928 Creator : Microsoft Notify Type : Machine Check Exception Timestamp : 1/9/2017 22:04:31 (UTC) Flags : 0x00000000 =============================================================================== Section 0 : Processor Generic ------------------------------------------------------------------------------- Descriptor @ ffffda84e41180a8 Section @ ffffda84e4118180 Offset : 344 Length : 192 Flags : 0x00000001 Primary Severity : Fatal Proc. Type : x86/x64 Instr. Set : x64 Error Type : Cache error Operation : Instruction Execute Flags : 0x00 Level : 0 CPU Version : 0x00000000000506e3 Processor ID : 0x0000000000000007 =============================================================================== Section 1 : x86/x64 Processor Specific ------------------------------------------------------------------------------- Descriptor @ ffffda84e41180f0 Section @ ffffda84e4118240 Offset : 536 Length : 128 Flags : 0x00000000 Severity : Fatal Local APIC Id : 0x0000000000000007 CPU Id : e3 06 05 00 00 08 10 07 - bf fb fa 7f ff fb eb bf 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 Proc. Info 0 @ ffffda84e4118240 =============================================================================== Section 2 : x86/x64 MCA ------------------------------------------------------------------------------- Descriptor @ ffffda84e4118138 Section @ ffffda84e41182c0 Offset : 664 Length : 264 Flags : 0x00000000 Severity : Fatal Error : ICACHEL0_IRD_ERR (Proc 7 Bank 0) Status : 0xf610140000040150 Address : 0x00007ffec43ad130 Misc. : 0x0000000000000000[/quote] ICACHEL0_IRD_ERR (Proc 7 Bank 0) - cache read error, processor 7 bank 0.

Overclocking:
If you are overclocking, set all the hardware components to their defaults.

Test your RAM modules for possible errors.
MemTest86+ - Test RAM
Run memtest86+ for at least 8 consecutive passes.

If it starts showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Take a camera snap of the memtest86+ window before closing the program. Let us see it.
Screenshots and Files - Upload and Post in Ten Forums - Windows 10 Forums

Stress test the Graphics Card using Furmark.
FurMark - GPU Stress Test
Take a Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

Stress test the CPU.
Prime95 - Stress Test Your CPU
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Also, check that all fans are working and none are clogged. Check temperatures with a program like Speedfan or CPUZ or HWMonitor. If the PC has been running hot that can damage the CPU.

 

Should i run memtest86+ even then i use ddr4 or should i use the free version of memtest86? And also How long should i run furmark for? If it doesnt overheat?

Update:
I decide to use memtest86 since it has ddr4 support

 

I did the cpu stress test, and after 2 hours and 30 min~ my pc got a bsod, and after that it the pc got weird, and slow.

 

My cpu is acting weird and my pc freezes every 3 second.
Imgur: The most awesome images on the Internet

Probarly my flaut because i ran furmark, with another GPU then i normally use, and didn't install the right driver, but i still think you should know it since, it looked weird.

I'm still doing the memtest, its on 5 passes after 9 hours and 30 minutes.

 

Were you monitoring temperatures? Sounds suspiciously like a over heating problem.

Run dm_log_collector again ang upload the zip file, lets see if anything has changed.

 

Memtest just got done: Imgur: The most awesome images on the Internet
Then i was cpu stress testing was 12:36 10/01, and i was looking the 2 hours and 25~ min, and all the time it was on 69c, but i don't know the last 5-10 minutes, since i was about and make food.

 

I took my GPU out of my machine, and plugged a old in GTX 660 TI, and was able to run the CPU stress test fully, and for more then 3 hours, and so far there have been no issues with BSOD. And for testing i plugged my GTX 970 into my brothers pc, to see if there will be any issue there. Going to update about that later.

 

Have you tried this CPU Test from Intel.

Intel Processor Diagnostic Tool (works in Windows)
Only need to run 1 or 2 of the tests under most circumstances.
https://downloadcenter.intel.com/dow...iagnostic-Tool

Although i do not think it is is the cause of the WHEA_UNCORRECTABLE_ERROR (124), update your Razer drivers many references in WER= windows error report.
Also your logitech webcamera has drivers from 2012, update to windows 10 drivers or if not avaliable as a test uninstall and remove them.

 

Okay, even when i switch graphics card, it still crashs and shouldn't be due to cpu overheat because i was looking at speccy while the bsod come and my CPU was on 28c. (And my brother with my graphics card runs just fine)

 

Will try that @lifetec *Smile

 

I'm not able to run the Intel tools thing since the bsod, Got Worst and almost instantly gets a bsod after startup.

 

The machine check reason is moving a buit between processor 6 anf 7:
Code: Error : ICACHEL0_IRD_ERR (Proc 6 Bank 0) Error : ICACHEL0_IRD_ERR (Proc 6 Bank 0) Error : ICACHEL0_IRD_ERR (Proc 7 Bank 0) Error : ICACHEL0_IRD_ERR (Proc 7 Bank 0) Error : ICACHEL0_IRD_ERR (Proc 6 Bank 0)[/quote] Found this: BSOD GenuineIntel Error Code 124 - [Solved] - Windows 7

Attachment 116768

Looking more and more like a CPU problem.