Windows 10: BSOD when pc is under stress

Done *Smile

 

Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to install as less as possible software using custom/advanced options, you can use this tutorial to do so *Arrow AMD Graphics Drivers - Install Without Catalyst Install Manager - Windows 7 Help Forums
Attachment 86634
Code: 0: kd> lmvm atikmdag Browse full module list start end module name fffff801`5a620000 fffff801`5bfbf000 atikmdag T (no symbols) Loaded symbol image file: atikmdag.sys Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys Image name: atikmdag.sys Browse all global symbols functions data Timestamp: Mon Mar 21 15:19:43 2016 (56F002FF) CheckSum: 0192D3CB ImageSize: 0199F000 Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4[/quote]

 

[/quote] I did all you said. After reinstalling the drivers I rebooted and went to play. After 6 minutes got another BSOD: "IRQL NOT LESS OR EQUAL" and then I was unable to boot into windows.

After putting the RAM timings to auto it booted (maybe coincidence), but windows didn't make the dump file of this last BSOD.

 

Please make sure your pc is configured for small dump files How to configure minidump | Windows 10 tutorial

 

I did the changes that were mentioned on the link you gave me, but it still doesn't save the minidump if the computer crashes on the reboot after the BSOD.

Today when I turned my computer on It froze right after logging onto my account. I rebooted and right after the loading screen a BSOD: "IRQL NOT LESS OR EQUAL" again. I waited for it to create the dump file and restart automatically, but right after, on the windows boot loading screen It crashed and restarted. I was only able to have a smooth boot at the 4th try, and there's no new .dmp on the Minidump folder.

I never had problems booting before

 

What tests did you run on the CPU & GPU?

 

Stress tests. CPU it was AIDA64 and GPU MSI Kombustor, 3 hours each

 

Aida64 doesn't look like a stress test on my first sight. Are there logs or something of the results besides the temperature?

 

It has a stress test:
http://www.aida64.com/sites/default/...?itok=pBcGToF9.

I don't have any logs

 

I would want to ask that you run below stress tests according to the instructions.
We use these stress test for a long time, they provide proper results in many cases about the situation of the stressed component.
Aida64 may be a good tool, I don't know as I do not use it myself, but we are more familiair with the stress tests below and know what a good or bad result looks like with these tests.





Diagnostic Test

CPU TEST


Run Prime95 - Stress Test Your CPU - Windows 10 Forums CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums



Note If you're overclocking anything, please stop it and set everything back to default while troubleshooting


Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the results and post them.






Diagnostic test

GPU TEST


Run Furmark tutorial



Note Run Furmark for around 30 minutes



Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if temperatures rise too high
When finished, make a photo/screenshot of Furmark and post it.

In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor

• the frequency of the GPU,
• the GPU memory clock,
• the temperature,
• the power,
• the load on the GPU,
• Etc.

I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.

 

I have been a little busy lately so I haven't had the time to run the tests, however I got several BSODs that may be handy to debug the problem

BSODs dmp files:

Attachment 87484

 

BSOD Posting Instructions

 

Before any new suggestions are made I would like to see the results of the stress tests, while awaiting the results the dumps are being analyzed *Smile