Windows 10: BSOD with Critical_Process_Died, dump creation hangs on 0%

I am receiving BSOD with Critical_Process_Died. Dump is enabled, but the system hangs on 0%.

My system SSD looks to be ok, sfc /scannow also doesn't find any integrity violations. Any advises where to dig next?

:)

 

BSOD Error: CRITICAL_PROCESS_DIED

My laptop experienced a BSOD with an analysis by "Who Crashed" as follows-

On Sat 11/10/2018 2:08:03 PM your computer crashed or a problem was reported

crash dump file: C:\WINDOWS\MEMORY.DMP

This was probably caused by the following module: ntkrpamp.exe (nt!PsSetLegoNotifyRoutine+0x46C)

Bugcheck code: 0xEF (0xFFFFFFFFA8C97440, 0x0, 0x0, 0x0)

Error: CRITICAL_PROCESS_DIED

Bug check description: This indicates that a critical system process died.

There is a possibility this problem was caused by a virus or other malware.

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: ntkrpamp.exe .

Google query: ntkrpamp.exe CRITICAL_PROCESS_DIED

Following is a link to my "one drive" BSOD folder with memory.dmp and other files for evaluation:

https://1drv.ms/f/s!AhtpFas_Rp_hiUvPKtxMgmB-b1B5

Please advise resolution for the said BSOD. Thanx!

 

Critical_Process_Died BSOD

Hi,

In order to resolve your concern, we suggest that you to follow these steps:

• If you've installed any new apps or devices, uninstall or unplug them and restart your PC.
• Make sure your PC has the latest updates:

• Go to the search box.
• Type Windows Update then Enter.
• Select Check for updates.
• In the Settings menu, select Check for updates button.
• When it's finished, restart your PC.

You may also check this
link for more troubleshooting steps regarding critical_process_died error message.

Let us know how it goes.

 

BSOD - No Dump Files - Hangs on 0%(In BSOD)

Hi TWM16,

What registry file do you mean exactly?

This is unfortunately not good news, basically a 0x124 hardware error where no record of the crash could be saved.
This has a few causes, but I will post everything to ensure we're not missing something.
Code:

A 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers, overheating, improper seating or BIOS problems.



STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST


Run Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.




TWO [/i] RAM TEST


Run MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Make a photo of the result and post it please.

Addition:
If errors show up you can stop the test, remove all sticks but 1 and test this single stick in each slot for 8 passes or until errors show, switch sticks and repeat.
If errors show up and you see them a lot later, no problem, the errors don't affect the test.




THREE [/i] HDD TEST


Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run the long test.


Note Do not run SeaTools on an SSD as the results will be invalid.
Make a photo of the result and post it.



Run chkdsk using option TWO
with parameter /r
Disk Check - Windows 7 Help Forums
Upload the chkdsk log *Arrow Chkdsk Log in Event Viewer - Read in Windows 10 - Windows 10 Forums



Run HDTune to

• scan for errors, no quick scan but full scan
• check the health,
• benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the error scan,
• the health,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR [/i] GPU TEST


Run FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Make a photo of the result and post it.

In Furmark you can find a tool called 'GPU-Z' (if you want to install GPU-Z is up to you), when GPU-Z is open click on the 'Sensors' tab, on this tab you can monitor

• the frequency of the GPU,
• the GPU memory clock,
• the temperature,
• the power,
• the load on the GPU,
• Etc.

I would like you to make a screenshot of GPU-Z after you have either cancelled Furmark for any reason or Furmark is finished, post this screenshot in your next reply with the result of Furmark.

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.How to fill in your system specs: